Bosch Ascenta SHE4AM12U 수리 지침 - 페이지 18

{카테고리_이름} Bosch Ascenta SHE4AM12U에 대한 수리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Ascenta SHE4AM12U 50 페이지.
Bosch Ascenta SHE4AM12U에 대해서도 마찬가지입니다: 수리 지침 (27 페이지)

페이지 인쇄

4.12.1 Backflow valve

The backflow valve is located inside the sump at the internal

drain hose inlet. It prevents waste water from entering the sump.

1. Backflow valve assembly

2. Flap

4.13

Tank with base and sump

4.13.1 Tank, base and sump assembly

The tank, base and sump are assembled as one unit and aren't

available as a service part. If plastic cable holders, part holders

and screw holes are damaged or stripped, the entire dishwasher

must be replaced.

702_58300000130262_ara_en_c

4.13.2 Rear leveling foot

The rear leveling foot can't be adjusted from the front – the rear

foot is the same as front feet and is adjusted the same way. The

base has provision for two rear feet in the rear corners, but the

center foot factory mounting should be used (below left).

Factory feet positions, like the center rear foot (1), have

provisions for set screws (below right). Outside rear positions

don't have set screw positions and shouldn't be used.

screws are in the installation parts bag.

1 – Center rear foot set screw location

Set

Page 18 of 50