Bosch Benchmark Series 서비스 매뉴얼 - 페이지 19

{카테고리_이름} Bosch Benchmark Series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Benchmark Series 45 페이지. Built-in wall ovens
Bosch Benchmark Series에 대해서도 마찬가지입니다: 서비스 매뉴얼 (36 페이지), 설치 매뉴얼 (32 페이지), 빠른 참조 매뉴얼 (4 페이지), 설치 지침 매뉴얼 (40 페이지), 빠른 시작 및 안전 매뉴얼 (13 페이지)

페이지 인쇄

58300000181895 ARA EN A

Figure 17 Removing inner support frame assembly

7. Lift the two pieces of insulation off the inner support frame

assembly and set aside.

8. Remove the screws securing the right and left side door shields

and set shields aside.

9. Carefully lift the glass pack out of the inner support frame.

Figure 18 Removing 2-pane glass pack

10. After removing and discarding all remnants of broken glass, install

the new glass pack assembly and reassemble the door.

11. Test operation of the door by fully opening and closing it several

times.

This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.

JUNE 2014

1 Door side shield

2 Inner support frame

3 Two-pane glass pack

1901 Main St ▪ Suite 600 ▪ Irvine, CA 92614

Service Manual for Bosch Benchmark Series Built-in Wall Ovens

6.2

Side-Hinge Doors

The serviceable parts of the side-hinge door include the handle,

endcaps, outer door glass/skin (service assembly), side hinge

assembly, 2-pane glass pack, middle glass, porcelain-coated door

liner, latch receiver assembly, and the various fasteners.

6.2.1

Removing and Reinstalling the Door



CAUTION

Avoid injury when removing and replacing oven doors.

 Be sure oven is cool enough for handling.

 Grasp only by sides, not by the handle.

 Do not force door open or closed.

 Handle with care–the door weighs approximately 40 lb.

To remove the door...

1. Open door fully.

2. Remove 3 Torx T-20 screws securing lower hinge to chassis (A);

do not remove the Phillips-head screw (B) – this controls the

door alignment cam.

Figure 19 Removing lower hinge assembly screws

Page 19 of 45

800 944-2904