Bosch DISHWASHER 작동 지침 - 페이지 31

{카테고리_이름} Bosch DISHWASHER에 대한 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch DISHWASHER 36 페이지. Dishwasher bosch
Bosch DISHWASHER에 대해서도 마찬가지입니다: 사용 설명서 지침 (30 페이지), 설치 지침 매뉴얼 (34 페이지), 사용 설명서 (30 페이지), 사용 설명서 (28 페이지), 사용 설명서 (30 페이지), 사용 설명서 (38 페이지), 사용 설명서 (42 페이지), 사용 설명서 지침 (32 페이지), 사용 설명서 지침 (36 페이지), 사용 설명서 지침 (30 페이지), 사용 설명서 (24 페이지), 사용 설명서 지침 (26 페이지), 사용 설명서 지침 (40 페이지), 사용 설명서 지침 (28 페이지), 사용 설명서 지침 (29 페이지), 사용 설명서 (28 페이지), 사용 설명서 (28 페이지), 사용 설명서 지침 (28 페이지), 설치 지침 매뉴얼 (50 페이지), 설치 지침 매뉴얼 (20 페이지), 운영 지침 (24 페이지), 사용 설명서 (25 페이지), 사용 설명서 (46 페이지), 사용 설명서 지침 (31 페이지)

페이지 인쇄
Bosch DISHWASHER 작동 지침

Delivery

Your dishwasher has been checked
thoroughly in the factory to ensure that it
is in working order. This may cause
small water stains. These will disappear
after the first wash cycle.

Technical specifications

Weight:
max. 60 kg
Voltage:
220–240 V, 50 Hz or 60 Hz
Connected load:
2.0–2.4 kW
Fuse:
10/16 A (UK 13A)
Power input:
switched off 0.1 W
not switched off 0.1 W
Water pressure:
at least 0.05 MPa (0.5 bar), maximum
1 MPa (10 bar). At a higher water
pressure: connect pressure-reducing
valve ahead.
Inlet rate:
minimum 10 litres/minute
Water temperature:
for cold water connection only.
Installation and connection

Installation

The required installation dimensions can
be found in the installation instructions.
Level the appliance with the aid of the
height-adjustable feet. Ensure that the
appliance is situated securely on the
floor.
A built-under or integrated appliance
which is installed subsequently as a
free-standing appliance must be
secured to prevent it from
overturning, e.g. by screwing it to the
wall or by installing it under
a continuous worktop which is
screwed to adjacent cupboards.
The appliance can easily be
installed in a fitted kitchen between
wooden and plastic walls.

Waste-water connection

1. The required work sequence can be
found in the installation instructions.
If required, fit a siphon with an
drainage connection.
2. Connect the waste-water hose to the
drainage connection of the siphon
with the enclosed parts.
Ensure that the drainage hose is not
kinked, crushed or twisted and that
there is no cover plate in the
drainage to prevent the waste water
from flowing out!

Fresh water connection

1. Connect the fresh-water connection
to the tap according to the
installation instructions with the
enclosed parts.
Ensure that the fresh-water
connection is not kinked, crushed or
twisted.
2. When replacing the appliance,
always use a new water supply hose.
aus
31