Bosch GI 246-161 사용 설명서 지침 - 페이지 26

{카테고리_이름} Bosch GI 246-161에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch GI 246-161 33 페이지. Bosch appliances dishwasher user manual

페이지 인쇄

Information

Notes on comparison tests

You will find details of the conditions for

the comparison tests on the additional

"Notes on comparison tests" sheet. The

consumption values for the relevant

programmes are given in the introduction.

General

Built-under and integrated appliances

which are subsequently installed as

free-standing appliances must be

secured to prevent them from falling

over, e.g. by screwing them to the wall

or by installing them under a continuous

worktop which is screwed to the

adjoining units.

For Swiss version only:

The appliance can be installed without

difficulty between wooden and plastic

walls in a kitchen range. If the appliance

is not connected via a plug, the

installation side must feature an all-pole

disconnector with a contact gap of at

least 3 mm in order to satisfy the

relevant safety regulations.

Installation

The dishwasher must be connected by

a qualified technician to ensure correct

operation. The specifications for supply,

drainage and connected load must fulfil

the required criteria as stated in the

following paragraphs or in the installation

instructions.

Install the appliance in the following

sequence:

– Check the delivery

– Install the appliance

– Connect the waste water

– Connect the fresh water

– Connect the power supply

Delivery

Your dishwasher was checked at the

factory to ensure that it was in perfect

working order. This may have left some

small water stains in the dishwasher.

These will disappear after the first rinse

cycle.

Installation

The required installation dimensions can

be found in the installation instructions.

Using the height-adjustable feet, adjust the

appliance until it is level. Ensure that the

appliance is standing firmly.

Waste water connection

See the installation instructions for the

required connection steps. If required,

attach a siphon with drainage spigot.

Using the enclosed parts, connect the

waste water hose to the drainage spigot

of the siphon.

Ensure that the drainage hose is not

kinked, crushed or twisted (ensure that

there is no sealing cover which prevents

the waster water from flowing away!).