Bosch SBE69U11EU 사용 설명서 - 페이지 11

{카테고리_이름} Bosch SBE69U11EU에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch SBE69U11EU 44 페이지.

Using special salt

Always refill with special salt

immediately before switching on the

appliance. This ensures that overrun

special salt solution is immediately

washed out and does not corrode the

rinsing tank.

1. Open the screw-type cap of the

compartment 1b.

2. Fill the tank with water (only required

when switching on the appliance for

the first time).

3. Then add dishwasher salt (not table

salt or tablets).

The water is displaced and runs out.

As soon as the salt refill indicator H

on the fascia is lit, top up the salt.

* depending on model

Water softening system/Special salt

Using detergents with salt

component

If combined detergents with a salt

component are used, salt can usually be

omitted up to a water hardness of

21° dH (37° fH, 26° Clarke, 3.7 mmol/

l). If the water hardness is over 21° dH,

special salt must be used.

Switching off salt refill

indicator/water softening

system

If the salt refill indicator H is impaired

(e.g. when using combined detergents

containing salt component), it can be

switched off.

Never fill the salt dispenser with

detergent. You will destroy the water

D e t e r g e n t s wi t h s a l t co m p o n e n t

Sw i t c h i n g o f f w a t e r s o f t e n i n g s y s t e m

Proceed as described under

"Adjusting the water softening

system" and set the value to :

The water softening system and salt

refill indicator are now switched off.

Caution