AirStage ABUA24TLAV 설치 매뉴얼 - 페이지 4

{카테고리_이름} AirStage ABUA24TLAV에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AirStage ABUA24TLAV 17 페이지. Indoor unit

페이지 인쇄

1. Error Codes

Name and Shape

Drain hose insulation

VT wire

Insulation (Pipe)

Silencer pipe

] 1

2.4. Optional parts

Description

Auxiliary pipe

UTY-XWZXZC

UTY-XWZXZB

External connect kit

UTY-XWZXZD

UTY-XWZXZE

2.5. About unit of the length

All Fujitsu General products are manufactured to metric units and tolerances. United

States customary units are provided for reference only. In cases where exact dimensions

and tolerances are required, always refer to metric units.

3. INSTALLATION WORK

Correct initial installation location is important because it is difﬁ cult to move unit after it is

installed.

] 1

3.1. Selecting an installation location

Decide the mounting position together with the customer as follows.

Select installation locations that can properly support the weight of the indoor unit.

Install the units securely so that they do not topple or fall.

Do not install the indoor unit in the following areas:

• Area with high salt content, such as at the seaside. It will deteriorate metal parts,

causing the parts to fail or the unit to leak water.

• Area ﬁ lled with mineral oil or containing a large amount of splashed oil or steam,

such as a kitchen. It will deteriorate plastic parts, causing the parts to fail or the unit

to leak water.

• Area that generates substances that adversely affect the equipment, such as

sulfuric gas, chlorine gas, acid, or alkali. It will cause the copper pipes and brazed

joints to corrode, which can cause refrigerant leakage.

• Area that can cause combustible gas to leak, contains suspended carbon ﬁ bers or

ﬂ ammable dust, or volatile inﬂ ammables such as paint thinner or gasoline. If gas

leaks and settles around the unit, it can cause a ﬁ re.

• Area where animals may urinate on the unit or ammonia may be generated.

Do not use the unit for special purposes, such as storing food, raising animals,

growing plants, or preserving precision devices or art objects.

It can degrade the quality of the preserved or stored objects.

Do not install where there is the danger of combustible gas leakage.

Do not install the unit near a source of heat, steam, or ﬂ ammable gas.

Install the unit where drainage does not cause any trouble.

En-3

Q'ty

Application

Adhesive type

3-15/16 × 8-11/16 in.

(100 × 220 mm)

For ﬁ xing the drain hose

L 11 in. (280 mm)

Adhesive type

6-5/16 × 4-5/16 in.

(160 × 110 mm)

Connect the silencer pipe to the small

(liquid) pipe.

Model No.

Application

For indoor side pipe joint

(For AB18, AB24)

9374714025

For output function

(Output terminal / CNB01)

For control input function

(Apply voltage terminal / CNA01)

For control input function

(Dry contact terminal / CNA02)

For forced thermostat off function

UTY-XWZXZ7

(Apply voltage terminal / CNA03)

For forced thermostat off function

(Dry contact terminal / CNA04)

WARNING

CAUTION

Install the indoor unit, power supply cable, transmission cable, and remote controller

cable at least 40 in. (1 m) away from a television or radio receivers. The purpose

of this is to prevent TV reception interference or radio noise. (Even if they are

installed more than 40 in. (1 m) apart, you could still receive noise under some signal

conditions.)

If children under 10 years old may approach the unit, take preventive measures so

that they cannot reach the unit.

Take precautions to prevent the unit from falling.

(1) Install the indoor unit on a place having a sufficient strength so that it withstands

against the weight of the indoor unit.

(2) The inlet and outlet ports should not be obstructed; the air should be able to blow all

over the room.

(3) Leave the space required to service the air conditioner.

(4) Install the unit where connection to the outdoor unit (or RB unit) is easy.

(5) Install the unit where the connection pipe can be easily installed.

(6) Install the unit where the drain pipe can be easily installed.

(7) Install the unit where noise and vibrations are not ampliﬁ ed.

(8) Take servicing, etc., into consideration and leave the spaces. Also install the unit

where the ﬁ lter can be removed.

(9) Do not install the unit where it will be exposed to direct sunlight.

] 1

3.2. Installation dimension

Floor console

Left

12 (300)

or more

Under ceiling

Left

6 (150)

or more

91 (2300)

CAUTION

Right

Unit: in. (mm)

12 (300)

or more

Ceiling

Right

Indoor unit

12 (300)

or more

Ceiling

1 (20)

or more

Floor

Unit: in. (mm)