Dragonfly DF-SL-100-ALR 설치 매뉴얼 - 페이지 2

{카테고리_이름} Dragonfly DF-SL-100-ALR에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dragonfly DF-SL-100-ALR 2 페이지. Ambient light rejecting fixed projection screens

페이지 인쇄

ALR Fixed Screen Installation Manual

Dragonfly Fixed Screen Assembly Instructions

Step 1. Unpack the Screen

Lay out all the parts on a clean, flat surface.

J. To avoid stains or damage, do not unpack the screen material at this time.

Package Contents

Screen Frame

Upper Wall

(2 short, 2 long)

Mounting Bracket (2)

5x40mm Phillips

Concrete

Head Screws (8)

Anchors (8)

L-Bracket

Spring Tool (2)

Screws (16)

Step 2. Assemble the Frame

A carpenter's square is very helpful for this step.

A. Place all of the frame tubes face down on a flat, clean work surface and line up the ends to form the shape

of the finished screen.

B. Insert the brackets into the frame ends as shown, then fully assemble the frame, Secure each corner with

four screws.

C. Work around the frame several times, using the square to align the frame corners and tightening the

screws a little each time.

L-Bracket

Top Frame

Side Frame

Lower Wall

Screen Material (1)

Mounting Bracket (2)

Screen Retaining

L Bracket

Springs

Assembly (4)

Installation

Protective Pad

Gloves (2 pr)

for Assembly (1)

Step 3. Put on Installation Gloves

*The included installation gloves MUST be worn by the installers handling the screen material.

Step 4. Attach the Screen Material

A. Clean the work area to avoid staining the screen material. Begin with the assembled frame laying face-

down on a protective pad or a clean, soft surface. Remember to wear the installation gloves while handling

the material!

B. Unpack the screen material and lay it centered in the frame, then gather the spring tools and springs.

Place four longer springs at each corner of the frame. Installation notes:

• The springs should be hooked into the outermost channel in the back of the frame using the tool as

illustrated.

• On the spring, the large hook attaches to the screen material. The small hook attaches to the frame.

• Hook the spring on the screen material, then to the frame.

C. Using the spring tools, attach the four springs in each corner first, then work toward the center of each

side.

Spring Installation

Size

Top

Bottom

92"

100"

110"

120"

170314-1538

ALR Fixed Screen Installation Manual

Spring Quantity

Left

Right

Total