Electrolux WRT18MP6CS6 사용 및 관리 매뉴얼 - 페이지 6
{카테고리_이름} Electrolux WRT18MP6CS6에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux WRT18MP6CS6 22 페이지. Top mount refrigerator
페이지 인쇄DOOR
REMOVAL
AND
REVERSAL
INSTRUCTIONS:
t.
Remove toe grille and top hinge cover.
2.
Remove top hinge with 3/8" hex driver and lift freezer door off of
center hinge pin. Set door aside.
3.
Unscrew center hinge pin using adjustable wrench and save for
reassembly, Ensure plastic washer stays on hinge pin,
4.
Lift refrigerator door off of bottom hinge and set aside,
5.
Remove center hinge and shim by removing inside screw and
loosening two outside screws enough to allow hinge and shim to
slide out, Tighten screws,
6.
Loosen two outside screws on opposite side of refrigerator, remove
inside screw and install center hinge.
7.
Remove two screws on bottom hinge with 3/8" socket wrench,
8.
Install bottom hinge on opposite side with the two screws removed
from step 7,
9.
Unscrew bottom hinge pin using adjustable wrench, Move hinge pin
to other hole in hinge and tighten with adjustable wrench,
t0, Reverse door handles (see instructions on next page),
tt,
Move freezerand refrigerator door stopstooppositeside,
Before
starting screws, use an awl to puncture the foam.
t2, Position refrigerator door onto bottom hinge pin and screw center
hinge pin through center hinge into top of door. Close refrigerator door
to help align hinge hole,
13, Tighten center hinge pin with adjustable wrench.
14, Remove cabinet and hinge hole plugs and move to opposite side,
15, Lower freezer door onto center hinge pin.
16, Close freezer door. Have an assistant lift up on opposite side of door
while tightening screws to install top hinge,
17, Replace toe grille and top hinge cover.
18, Plug in electrical power cord and turn refrigerator temperature control
to center position. Adjust setting as necessary.