Electrolux WRT21S4AW3 사용 및 관리 매뉴얼 - 페이지 7
{카테고리_이름} Electrolux WRT21S4AW3에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux WRT21S4AW3 21 페이지. Top mount refrigerator
페이지 인쇄TO REMOVE
FREEZER
HANDLE:
(Handles may be easier to reverse while doors are off.)
1.
Remove two screws attaching handle to bottom of freezer door.
2.
Remove short trim piece by sliding trim straight up and off of handle
bracket.
3.
Remove screw attaching top of handle to door.
4.
Magnetic Nameplate Models: Gently pry magnetic nameplate frame from
door. Remove nameplate from its frame, turn frame upside down and
install in old handle holes. Insert magnetic nameplate into frame.
Self-Adhesive
Nameplate
Models: Gently peel off nameplate from door
and reapply over old handle holes.
TO ATTACH
FREEZER
HANDLE:
1.
Reinstall handle on opposite side, using same hole as nameplate.
2.
Attach handle to bottom of door.
3.
Slide trim piece straight down onto handle bracket.
TO REMOVE
FREEZER
HANDLE:
(Handles may be easier to reverse while doors are off.)
1.
Remove two screws attaching handle to bottom of freezer door.
2.
Swing bottom of handle away from the door and slide handle straight up
and off of dovetail button.
3.
Remove screw and dovetail button and install on other side, using the
same holes as nameplate.
4.
Magnetic Nameplate Models: Use putty knife to gently pry magnetic
nameplate frame from door. Remove nameplate from its frame, turn frame
upside down and install in old handle holes. Insert magnetic nameplate
into frame.
Self-Adhesive
Nameplate Models: Use putty knife to gently peel off name
plate from door and reapply over old handle holes.
TO ATTACH
FREEZER
HANDLE:
1.
Start with handle offset away from door. Place top of handle over dovetail
button, swing handle into an upright position and pull downward, locking it
into place.
2.
Secure bottom of handle with two screws removed earlier.
TO REMOVE
FREEZER
HANDLE:
(Handles may be easier to reverse while doors are off.)
1.
Remove two screws attaching handle to bottom of freezer door.
2.
Remove button plug using edge of putty knife.
3.
Remove screw on side of freezer door and remove handle.
TO ATTACH
FREEZER
HANDLE:
1.
Secure side of handle to door and replace button plug.
2.
Secure handle to bottom of door.