Electrolux WTB2300 설치 매뉴얼 - 페이지 9

{카테고리_이름} Electrolux WTB2300에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux WTB2300 16 페이지. Ik007 integration kit refrigeration
Electrolux WTB2300에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)

페이지 인쇄
Electrolux WTB2300 설치 매뉴얼

PREPaRaTIon

1. unpack refrigerator, removing foam packing.
2. lay the refrigerator down on its back on a piece of
soft packing material. use caution and two people
while laying the appliance down.
3. Remove top door stopper if fitted (Figure 1).
4. Place adjustable rollers in the fully retracted position
by screwing height adjusting screw fully anti-clockwise
(Figure 2). do not remove the adjusting nut completely.
5. Stand upright.
Figure 1
Figure 2
Plastic roller nut
Figure 2
aTTaChIng ThE ToP hIngE BRaCKET
1. Remove top hinge cover (Figure 3), cover clips off.
2. Remove the three (3) top hinge screws.
3. Elevate hinge.
4. Slide the top hinge bracket into position below
the hinge.
5. Re-attach hinge and screws ensuring that refrigerator
door is still correctly positioned.
IMPORTANT!
You must ensure that the refrigerator door is:
• Parallelwithsidesandtopofcabinet.
• T hegapbetweenthedoorandcabinetistypically
12mm allowing the door gasket to act correctly
(Figure 4).
Note: Ensure the gasket acts correctly, i.e. doesn't make
a noise or leave gaps when the door is closed.
6. Recap hinge cover into position.
Figure 3
1
Top hinge cover
2
3
Top hinge bracket fitted
In case left side hinge
Figure 4
6
5
5
4
Top hinge
bracket
In case right side hinge
12mm
9