1M2M ED 16 Series 설치 매뉴얼 - 페이지 2

{카테고리_이름} 1M2M ED 16 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 1M2M ED 16 Series 3 페이지.

1M2M ED 16 Series 설치 매뉴얼
1M2M Click
Installation manual click version
Mounting instructions
The enclosure has a transparent rubber seal in the cover (see image 4, shown as white ring). To be sure the
enclosure is closed properly please follow these instructions.
1. Make sure the transparent rubber ring is placed around the cover.
2. If it is difficult to close the lid you can put a bit of Teflon grease on the ring.
3. To have the best protection against water place the enclosure vertically, with the lid pointed downwards.
Below some examples in Image 5
4. The click mount part has to be mounted to something, especially
the two holes near the lid should be used for mounting the
device. This way the lid will have a strong fit. The other two
optional holes can be used for extra strong mounting.
See image 6.
Installation manual 1M2M Click 17-04-2020 Page 2 of 3
Image 4
Image 5
Image 6