Drainvac Automatik Series 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Drainvac Automatik Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drainvac Automatik Series 18 페이지.

TITRE

HOW THE SYSTEM WORKS

TITRE

Drainvac central vacuum cleaners are designed to vacuum both solids and liquids. The tank never has to be

emptied manually since the systems are directly connected to the building's drainpipe through which the

wastewater is automatically evacuated.

Step 1

Unit is off.

The rubber hand

is closed

Step 2

Start up: The dirt begins to be

vacuumed and water flows in.

VISUAL INSPECTION

Your Automatik system is very user friendly and we recommend a visual inspection through the porthole

once a year or when needed. If you wish to clean the inside of the unit, refer to the following section "Regular

Maintenance".

REGULAR MAINTENANCE

Except for removing objects that could remain at the bottom of your tank

(for lower tank models), the only maintenance required is cleaning the inside

of the unit.

To proceed, you just have to

remove the porthole glass as

illustrated, by pivoting it in an

anti-clockwise motion using

the handles.

Electrode

Water Inlet

Protective

Screen

MAINTENANCE PROCEDURES

TITRE

Use a scouring sponge to especially clean the protective

screen, the two electrodes and, if needed, the tank.

A blocked protective screen could reduce the unit's

performance and dirty electrodes could not adequately

send a signal to the unit to pass on to the wastewater

evacuation cycle.

At the same time, it is recommended to visually inspect

the water inlet pipe and the rubber hand to

make sure that no foreign object is

obstructing the water flow.