Drainvac G2-008 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Drainvac G2-008에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drainvac G2-008 18 페이지.

UNIT INSTALLATION

1) MOUNTING THE UNIT ON THE WALL

• Undo the fastener securing the wall bracket and base at the

back of the unit with cutting pliers.

• If the wall is covered with gypsum

board, we recommend installing a

wooden panel screwed to the wall studs

beforehand for more stability. Then,

screw the bracket to the wall with the

five (5) screws supplied with the unit.

• For a installation directly on a wall stud, screw three (3) screws in

the middle area only.

Cut the fastener

Gypsum

Board

Wooden

panel

Wall Stud

Suggested distance

from the floor:

50" (125 cm)

• Lift the head to slide its support onto the wall bracket.

2) CONNECTING THE

DUST INLET

Connect the dust inlet onto the unit

securing it with a collar (do not glue).

UNIT INSTALLATION