DRAKE AUDIOACCENT 사용 설명서 - 페이지 13

{카테고리_이름} DRAKE AUDIOACCENT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DRAKE AUDIOACCENT 16 페이지. Assistive listening system

페이지 인쇄

Operating the MR306 Receiver, continued

PRESET TUNING

Once the desired frequencies are stored in the preset

buttons (13), they can easily be recalled.

To store a station into memory, use the following

sequence:

1. Tune to a desired frequency.

2. Press the "MEMO" (12) button and a blinking

Memory indicator (7) will appear on the LCD display

(10).

3. While the memory indicator is blinking, press one of

the five preset buttons (13) to store the frequency. The

memory indicator light will turn off 15 seconds later, if

no other preset buttons are pressed.

MEMORY RECALL

Recall a stored frequency by simply pressing the

appropriate preset button (M1-M5).

MEMORY BACKUP OF STORED FREQUENCIES

When the batteries are low, the LCD display will flash or

turn off. If this occurs, switch the "ON/OFF" switch to

the "OFF" position. Then install new batteries. The

new batteries must be installed within one minute of the

time that the old batteries are removed in order to save

the frequencies stored into memory.

Placed in a pocket:

digital

receiver

TUNING

SUGGESTIONS FOR RECEIVER MANAGEMENT

Different types of facilities will use varied approaches

for receiver management and earphone sanitation. The

following includes some options that customers have

used successfully:

1. Regular users purchase their own receiver and

maintain the batteries and earphone.

2. Some facilities label each receiver and earphone with

the name of the person to which the receiver/earphone

is assigned and used.

3. Ushers issue receivers to those people who request

them. Earphones are sanitized after each use. Foam

ear cushions can be replaced or washed with a mild

detergent, rinsed thoroughly, and air-dried. Certain

models of earphones can be sanitized with an alcohol

pad.

4. The receivers can be stored in a multiple storage

case with a credit card or driver's license left as

collateral for the receiver.

5. Regular users purchase their own earphone or

headphone and bring them to use with receivers at the

facility.

Examples for wearing the MR306 receiver:

To assemble belt clip to receiver:

1. Apply double-stick tape (A) to

plastic belt clip (B).

2. Stick clip in desired location on

the back of the receiver, without

covering the battery cover.

Clipped onto a belt:

digital

receiver

TUNING