Bosch SRV53C03UC-30 설치 지침 매뉴얼 - 페이지 12

{카테고리_이름} Bosch SRV53C03UC-30에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch SRV53C03UC-30 15 페이지. 18-inch models

페이지 인쇄

Figure 16

Top Mount

Side Mount

Figure 18

' I i

Figure 19

Dishwasher

,,J

Placement

SLIDING

THE DISHWASHER

INTO PLACE

The unit should now be ready to slide into the cabinet

opening. To avoid scratching the floor, use floor protection

and caution when sliding the dishwasher

into the cabinet.

Make sure that the hoses and cords do not bunch up

behind the unit or kink as you slide the unit back. Make

certain to sIide the unit into place before raising the leg

levelers.

LEVELING

THE

DISHWASHER

Make sure the dishwasher

is level. Adjust the rear leveler

by turning the center screw at the front of the dishwasher,

as shown in Figure 16. Turning the screw clockwise raises

the rear of the dishwasher. Adjust the front levelers as

shown in Figure 16. Turning the levelers to the right raises

the dishwasher.

SECURING

THE DISHWASHER

1. Drive the mounting screws through the holes in the

mounting brackets as shown in Figure 17 for Top or

Side Mount.

2. After the unit is installed in the enclosure, leveled and

secured, lock the two front leg levelers in place by

driving the enclosed leg leveIer locking screws into

each screw boss located in front of the levelers, See

Figure 18.

3. Tighten screws until they are flush with the surface of

the bosses.

ATTACHING

THE

TOE

PANEL

Your dishwasher comes with a two-piece toe paneI to

allow height adjustment.

1. Position the slotted rear toe panel on the dishwasher

first. Allow it to rest on the floor.

2. Position the mating front toe panel on top of the rear

toe panet allowing the angled edge to rest on the

mating edge of the dishwasher.

3. Drive the two black screws (included) through the hole

in the toe panel to secure. Use the supplied screws to

avoid damaging the dishwasher. See Figure ! 9.