Dramm Rain Pro Expandable 설치 및 프로그래밍 매뉴얼 - 페이지 14
{카테고리_이름} Dramm Rain Pro Expandable에 대한 설치 및 프로그래밍 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dramm Rain Pro Expandable 20 페이지. Expandable controller 3, 7, 11, 15 stations
페이지 인쇄controller. Leave the dial in the RUN position to have the
controller operate as programmed.
RAIN/OFF – Rotate the dial to the "RAIN/OFF" position to
stop all output of the controller. All irrigation will stop. To
return to normal operation, rotate dial back to "RUN."
MANUAL STATION – To manually activate a single
station once for a programmed length of time.
1. Rotate dial to "Manual Station."
2. Push → to desired station number.
3. Push + or – buttons to input length of time this
station will now operate this one time.
4. Rotate dial to "RUN" position.
5. Upon completion of this station operating manually
for length of time input, the controller will revert
back to "RUN" and operate as previously
programmed.
6.
To manually activate one complete cycle of either
program A, B or C.
1. Rotate dial to "Manual Program."
2. Choose program A, B or C. To change
program from existing program, push the PRG
button.
3. Push the → button to choose the first station in
the sequence of the manual program to start.
4. The "run time" for each station will be displayed
as currently programmed. For this cycle only,
you can customize each station run time
without affecting the individually programmed
station run times within a program.
MANUAL PROGRAM
14