Dramm Rain Pro Expandable 설치 및 프로그래밍 매뉴얼 - 페이지 9

{카테고리_이름} Dramm Rain Pro Expandable에 대한 설치 및 프로그래밍 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dramm Rain Pro Expandable 20 페이지. Expandable controller 3, 7, 11, 15 stations

페이지 인쇄

1. Trouble Shooting Guide

4. The day will be flashing. Use the + and –

buttons to select the current date. Push the →

button to set current time.

5. The time will be displayed. Use the + and –

buttons to select the current AM, PM or 24 hr

notation. Press the → button to go to hours.

Hours will be flashing. Use the + and – buttons

to set the current hour. Push the → button to

set minutes. Use the + and – buttons to select

current time in minutes.

6. Rotate dial to "RUN" to enter new data into the

controller.

SETTING PROGRAM START TIMES

1. Rotate the dial to program "START TIMES".

2. Choose program A, B, or C. To change

program from existing program, push the

"PRG" button.

3. Use the + and – buttons to adjust to desired

start time. This represents the time of day the

irrigation cycles will commence. All Stations

with programmed run times on this program (

A, B, or C)will come on, one at a time,

sequentially on all active days, commencing at

this time of day. Up to four start times can be

scheduled per day.

4. Push the →button to add another start time or

the "PRG" button to set the next program.

5. If all four programmed start times are turned

"OFF" then that specific program will never

start.