Bosch 8 Series 사용 정보 - 페이지 15

{카테고리_이름} Bosch 8 Series에 대한 사용 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch 8 Series 20 페이지. Combi steam oven
Bosch 8 Series에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (21 페이지), 조립 지침 (4 페이지), 설치 및 사용 설명서 지침 (16 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 및 설치 지침 (44 페이지), 시작하기 (7 페이지), 사용 설명서 (32 페이지), 사용자 설명서 및 설치 지침 (32 페이지), 사용 설명서 (12 페이지), 사용자 설명서 및 설치 지침 (24 페이지), 사용자 설명서 (28 페이지), 사용자 설명서 및 설치 지침 (28 페이지), 설치 및 사용 설명서 지침 (20 페이지), 사용자 설명서 및 설치 지침 (44 페이지), 사용 설명서 (12 페이지), 사용자 설명서 및 설치 지침 (40 페이지), 사용자 설명서 및 설치 지침 (32 페이지), 사용 설명서 (48 페이지)

Bosch 8 Series 사용 정보
Display
Setting
⁠  
FlexInduction
Change the switch-on mode for the Flex
Zone.
⁠  
Restoring factory settings
1
Factory setting
18.2 To go to the basic settings
Requirement: The hob must be switched off.
To switch on the hob, touch
1.
Within the next 10 seconds, press and hold
2.
seconds.
Product information
Directory for the technical after-sales
service (TK)
Production number
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. To call up the individual displays, touch the
control panel.
Cookware test
19  Cookware test
t
s
e
k
e
r
o
a
w
-
The quality of the cookware has a major influence on
t
C
o
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the size of the cookware
base corresponds to the size of the cooking zone be-
ing used.
Access is via the basic settings. → Page 14
19.1 Carrying out Cookware test
As a single cooking zone, the flexible cooking zone is
set in such a way that only the individual item of cook-
ware is checked.
At room temperature, place the cookware with ap-
1.
prox. 200 ml water in the centre of the cooking zone
that best fits the base of the cookware in terms of
size.
Call up the basic settings and select ⁠   ⁠   ⁠ .
2.
Cleaning and servicing
20  Cleaning and servicing
To keep your appliance working efficiently for a long
g
e
c
n
C
-
i
n
n
-
v
s
g
d
n
a
r
e
l
i
a
i
-
time, it is important to clean and maintain it carefully.
⁠ .
for 4
Display
⁠ ⁠ .
⁠ .
Value
- As two independent cooking zones.
- As a connected cooking zone.
1
- Individual settings
.
- Factory settings.
Touch
to access the basic settings.
3.
⁠   and  light up as a presetting.
a
Touch
repeatedly until the desired setting ap-
4.
pears.
Select the required setting in the settings area.
5.
Touch and hold
6.
a The settings are saved.
18.3 Discarding changes to the basic
settings
Touch
⁠ .
a All changes are discarded and not saved.
Touch the settings area. The
3.
the cooking zones.
a The test is running.
a After 10 seconds, the result appears in the cooking
zone displays.
19.2 Checking the result
You can see what the result means for the quality and
speed of the cooking process in the following table.
Result
The cookware is not suitable for the cooking zone
and therefore does not heat up.
The cookware is taking longer to heat up than ex-
pected and cooking is not progressing as well as
it ought to.
The cookware is heating up correctly and cooking
is progressing well.
Note: If you have any unfavourable results, reposition
the cookware on a smaller cooking zone, if available.
To activate this function, touch the settings range.
20.1 Cleaning products
You can obtain suitable cleaning products and glass
scrapers from customer service, a retailer or the online
shop www.bosch-home.com.
Cookware test en
1
for 4 seconds.
⁠   display flashes in
15