Bosch 800 WFMC8400UC 사용 설명서 - 페이지 22
{카테고리_이름} Bosch 800 WFMC8400UC에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch 800 WFMC8400UC 35 페이지. Nexxt 800 series washer
Bosch 800 WFMC8400UC에 대해서도 마찬가지입니다: 작동, 관리 및 설치 지침 매뉴얼 (24 페이지), 설치 지침 (2 페이지), 에너지 매뉴얼 (2 페이지)
페이지 인쇄
Spin speed
The maximum spin speed can be
reduced.
The maximum spin speed depends on
the selected program: see also
information on Page 18.
Turn the program selector to the
q
desired program.
Load the laundry and close the
q
door.
The Start/Pause indicator light
flashes (red).
Example:
Press the Menu button until Spin
q
speed" is displayed.
Current spin speed flashes.
The Start/Pause indicator light
flashes (red).
i
If no buttons are pushed within 10
seconds the display will revert
back to normal Ready". Changed
settings will be retained.
Press the Select button until the
q
desired spin speed or No final
spin" is displayed.
You can select other settings by
pressing the Menu button and change
them by pressing the Select button.
22
Press the Start/Pause button.
q
The program starts.
The indicator light is lit red.
i
The individual program steps are
indicated in the display field.
Program finished at
i
To change the program end time
the clock must be set first
(see Page 15).
Turn the program selector to the
q
desired program.
Load the laundry and close the
q
door.
The Start/Pause indicator light
flashes (red).
Example:
Press the Menu button until,
q
Program finished at" is displayed.
Current end time flashes.
The Start/Pause indicator light
flashes (red).
i
If no buttons are pushed within 10
seconds the display will revert
back to normal Ready". Changed
settings will be retained.
Press the Select button until the
q
program end time is displayed.
The program end time can be set
in 30 minute steps.
The end time can be programmed
up to a maximum 24 hours in ad
vance.
i
The end time will be reset if the
program, additional options or the
current time is changed.
i
If there is a small load of lightly
soiled laundry, the program may
end well before the selected end
time.
i
If there is a large load of heavily
soiled laundry, the program may
end several minutes after the
selected end time.
You can select other settings by
pressing the Menu button and change
them by pressing the Select button.
Press the Start/Pause button.
q
The delayed Start is activated.
The indicator light is lit.
Time delay" is indicated in the
display field.
Washing Mode
You can choose several washing
modes.
The Modes are:
-
Normal Wash"
Default wash time.
-
Quick Wash"
Reduced wash time for light soils
and shorter cycle time.