Bosch Axxis WFL 2090 작동 및 설치 지침 - 페이지 34

{카테고리_이름} Bosch Axxis WFL 2090에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Axxis WFL 2090 37 페이지. Axxis lavadora
Bosch Axxis WFL 2090에 대해서도 마찬가지입니다: 작동 및 관리 지침 매뉴얼 (37 페이지), 작동, 관리 및 설치 지침 매뉴얼 (36 페이지), 작동, 관리 및 설치 지침 매뉴얼 (36 페이지), (영어) 사용 설명서 (37 페이지)

WARNING

To reduce the risk of fire or electrical shock,

DO NOT use an extension cord or an adapter to

connect the washer to the electrical power

supply.

In the event that a ground fault circuit breaker is

to be used, only use types marked with the

following symbol:

Only this symbol can guarantee compliance with all

current regulations.

Do not insert/remove the power cord with wet or

damp hands.

Handle the plug body only when removing the plug

from the socket.

Transport, e.g. when moving

Before transporting the washing machine:

Turn off the water,

Release the water pressure in the supply hose

(refer to page 22),

Drain any remaining water (refer to page 20),

Disconnect the washing machine from the

electrical outlet.

Dismantle the supply and drainage hose,

Install all transport bolts.

Having transported the appliance and ensured

proper installation and connection, allow the Drain

program to run through before starting the first

wash program.

Preparing and inserting the transport bolts

q Remove the 4 covers.

q Prepare the transport bolts:

Loosen the screw in the sleeve until the end of

the screw is level with the end of the sleeve.

q Insert and tighten transport bolts 1,2,3 and 4.

The lug on the washing machine must be

located in the groove in the rear panel of the

housing.