Bosch Electronic with tempature selector 사용 설명서 및 설치 - 페이지 17
{카테고리_이름} Bosch Electronic with tempature selector에 대한 사용 설명서 및 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Electronic with tempature selector 25 페이지.
페이지 인쇄
Interrupting a wash programme
If you should wish to stop a programme already
in progress:
Turn the programme selector to «Stop».
Turn the programme selector to the
«Pumping
» or «Spin
position.
4
The «Spin
/Finished » indicator light
flashes.
If selecting the «Spin» function, adjust the
required spin speed (do not select the
5
«Rinse hold C/
» option.):
Press the «Start
4
The «Spin
/Finished
light comes on.
4
» programme
» button.
» indicator light
Wash programme end / Taking
the laundry out of the machine
4
The «Spin
/Finished
flashes.
Turn the programme selector to «Stop».
If necessary:
Select an additional programme
(«Pump
», «Spin
«Rinse r»).
Press the «Start
When the additional programme selected
has finished, turn the programme selector
to «Stop».
Taking the laundry out of the machine
Close the tap.
Open the door.
If the door cannot be opened:
Wait 2 minutes (the machine's safety device
is activated)
or:
If the «Rinse hold C/
selected, there will still be water inside the
appliance.
Select an additional programme («Pump
4
» or «Spin
Take the laundry out of the machine.
!
Remove any foreign material or metal
objects (clips, fasteners, money, etc.) which
may have collected in the drum or rubber
seal. Risk of rusting.
Leave the door open so that air can circulate
inside and dry the appliance.
» indicator light
4
» or
» button.
5
» option was
») to pump out the water.
17
en