Draper Access XL 설치 및 운영 지침 - 페이지 5

{카테고리_이름} Draper Access XL에 대한 설치 및 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper Access XL 5 페이지. Draper access xl electric projection screen
Draper Access XL에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지), 설치 및 운영 지침 (5 페이지)

페이지 인쇄
Draper Access XL 설치 및 운영 지침
Access XL 220 Volt Instructions by Draper
Please Note: 5V DC must be
connected to be able to set
limits using the wall switch.
Back of wall switch.
Please Note: Although both
Dry Contact and Data Cable
connections are shown, you
should only use one connec-
tion type per motor.
Internal Screen Wiring
Blue (Common)
Black (Up)
Brown (Down)
Green/Yellow
(Motor Ground)
N
To
230 VAC
L1
Line
GND
Built-In VIC-12/VIC-6*
12 Volt (VIC-12) or 6 Volt (VIC-6) Relay
Green
Yellow
14 13
9
: : : :
Black
5
: : : :
1
: : : :
Brown
*These wiring diagrams are for Access XL screens with motor on audience left (standard), and fabric unrolling from the back of the roller (standard).
ILT Switch-to-Motor—Dry Contacts or Data Cable connection
INSERT MOTOR DATA
CABLE HERE
Low Voltage and Wireless Control (LVC-IV)
White-Common to screen & 230V AC Neutral
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 230V AC-Hot
Black-to 230V AC-Hot
Green/Yellow (Ground)
Location of key
operated 0n-off
switch if furnished.
Dashed wiring by electrician
Low voltage wiring by others
Ring Terminal on ground wire
riveted to J-Box with Star Washer
Green/Yellow
Ground
Black
#2 Up
Brown
Screen Motor
#1 Down
Blue
Common
Jacketed Motor Cable
Wire soldered to terminal
Wire connected with Quick Disconnect
: : : :

Mounting Bracket Dimensions

12.7
9.5
38
mm
mm
mm
R 6.4
mm
3.2
35
mm
mm
6.4
mm
mm
R3.2
mm
www.draperinc.com
Receiver
Button
8
7
5
6
220 VAC
4
3
2
1
4.8
8
mm
mm
114
8
mm
32
mm
122.2
mm
197
mm
228.6
mm
(765) 987-7999
Please Note: This Splitter/
Jack is located inside the junc-
tion box of your Access XL
screen.
Data Cables to switches or
to additional motors can
be plugged into any of the
three open jacks. If this is a
"Case First, Screen Later"
installation, plug the motor
cable into the jack indicated
in the drawing.
3 Button Wall Switch
DOWN - Black
COM - White
UP - Red
Electrically Straight
Data Cable to more
LVC-IV modules*
RS232/485
Inputs/Outputs
Low Voltage
Trigger
*A maximum of six (6)
3-28 VDC
LVC-IV modules can be
linked together.
IR Eye Input
Built-In VIC-220*
115 Volt Relay
Ring Terminal on each Ground Wire
with Star Washer screwed to Spine
Green/
Green/
Yellow
Yellow
Black
Black
Brown
Brown
Blie
Jacketed Motor Cable
Wire connected with Quick Disconnect
: : : :
4.8
mm
28.6
mm
6.4
mm
page 5 of 5
Wall Switch
Ground
#2 Up
220 VAC
Screen Motor
#1 Down
Common