Technical data
Dimensions (DxWxH)
Weight
Max. capacity
Ambient temperature
Connection voltage
Connected load
Fuse protection
Ambient temperature
Product number/
Production number
You can find the rating plate on the back of the dryer.
Consumption rates
Cottons 8 kg
Cupboard Dry*
Iron Dry*
Easy-Care 3.5 kg
Cupboard Dry*
*Test program according to DIN EN 61121.
**The values may differ from the those specified depending on the type of fabric, mixture of
laundry to be dried, residual moisture in the fabric and loading capacity.
Drum interior light
(depending on model)
The drum is illuminated after the door is opened or closed, and also after the programme is
started. It goes out automatically. Replacing the bulb
Optional accessories
Exhaust air set
(depending on model)
WTZ
The exhaust air is conveyed directly via a hose.
1130
Washer-dryer stack connection set
WTZ
11310
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space. This connection set must always be used to secure the dryer to the washing
machine. With pull-out worktop: WTZ 11300
Installation underneath the worktop
WTZ
10290
Risk of electric shock!
Instead of the appliance covering plate, you must have a metal cover fitted by an expert.
WMZ
Platform
20460
For better loading and unloading.
The basket contained in the drawer can be used to carry the laundry.
60 x 60 x 85 cm (height adjustable)
approximately 36 kg
8 kg
5 - 35 °C
see appliance rating plate
These are guide values determined under standard
conditions. Fluctuations up to 10% are possible.
Spin speed in rpm
Drying time
(residual moisture)
in min.**
13 A
1400 (approx. 50 %)
95
1000 (approx. 60 %)
118
800
(approx. 70 %)
135
1400 (approx. 50 %)
67
1000 (approx. 60 %)
90
800
(approx. 70 %)
107
800
(approx. 40 %)
37
600
(approx. 50 %)
44
(bulb E14, 25 W)
Page 10.
(order from the after-sales service using the order number)
What to do if ...
If you cannot rectify a fault yourself, please contact our after-sales service. We will always find
an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service
technicians using original spare parts. The contact details of your local after-sales service can
be found in the enclosed after-sales service directory, or by calling one of these numbers:
– GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
– IE 01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket.
The
Start/Stop indicator
lamp does not light up.
The Filter/Venting Hose and
Start/Stop indicator lights
are flashing.
Dryer does not start.
Energy
consumption
in kWh**
The door opens by itself and/or
13 A
the Door indicator light is lit.
3.50
Programme terminated shortly
4.20
after starting.
4.79
Water is running out.
2.37
The required degree of dryness
3.15
was not achieved or the drying
time was too long.
3.84
1.18
1.48
Laundry damp.
The moisture content of the room
has increased significantly.
One or more indicator lights for
programme status are flashing.
Mains failure.
The interior light is not working
(depending on model).
Condensation in the exhaust
air duct.
9
Mains plug plugged in?
Programme selected?
Clean the fluff filter
page 4
Exhaust air duct blocked or knicked?
Clean the exhaust air duct
page 6.
If necessary, clean the insect screen on the exhaust air pipe.
Start/Stop button selected?
Door closed?
Programme set?
Push the door closed until you hear it engage.
Ambient temperature higher than 5 °C?
Align dryer horizontally.
Clean the fluff filter
page 4.
Ambient temperature higher than 35 °C
Was an unsuitable programme selected?
Has the dryer been installed with sufficient space on all sides?
Ensure that air can circulate.
Power failure
restart dryer.
Fine layer of scale on the moisture sensors
moisture sensors
page 6.
Use the next drying programme up or use the timer
programme as a supplement
Page 7.
Warm laundry feels damper than it really is!
Make sure the room is sufficiently ventilated.
Clean the fluff filter
page 4.
Check installation conditions
page 8.
Exhaust air duct blocked or knicked?
Clean the exhaust air duct
page 6.
If necessary, clean the insect screen on the exhaust air pipe.
Switch off, leave to cool down, switch on again, restart
programme.
Remove laundry from the dryer immediately and spread out.
This allows the heat to dissipate.
Pull out the appliance plug, remove the cover cap in the
interior above the door (use Torx 20 screw driver) and replace
the bulb. Close the cover cap.
Never operate the dryer without a cover cap.
Exhaust air duct too long? Check the maximum exhaust air
duct length. Further information
Installation instructions
for exhaust air duct.
airing.
page 7.
Clean the
10
페이지 인쇄