Technical data
Dimensions (DxWxH)
Weight
Max. capacity
Ambient temperature
Connection voltage
Connected load
Fuse protection
Ambient temperature
Product number/
Production number
You can find the rating plate on the back of the dryer.
Consumption rates
Cottons 8 kg
Cupboard Dry*
Iron Dry*
Easy-Care 3.5 kg
Cupboard Dry*
*Test program according to DIN EN 61121.
**The values may differ from the those specified depending on the type of fabric, mixture
of laundry to be dried, residual moisture in the fabric and loading capacity.
Drum interior light
(depending on model)
The drum is illuminated after the door is opened or closed, and also after the programme
is started. It goes out automatically. Replacing the bulb
Optional accessories
Exhaust air set
(depending on model)
WTZ
The exhaust air is conveyed directly via a hose.
1130
Washer-dryer stack connection set
WTZ
11310
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space. This connection set must always be used to secure the dryer to the washing
machine. With pull-out worktop: WTZ 11300
Installation underneath the worktop
WTZ
10290
Risk of electric shock!
Instead of the appliance covering plate, you must have a metal cover fitted by an expert.
60 x 60 x 85 cm (height adjustable)
approximately 36 kg
8 kg
5 - 35 °C
see appliance rating plate
These are guide values determined under standard
conditions. Fluctuations up to 10% are possible.
Spin speed in rpm
Drying time
(residual moisture)
in min.**
13 A
1400 (approx. 50 %)
95
1000 (approx. 60 %)
118
800
(approx. 70 %)
135
1400 (approx. 50 %)
67
1000 (approx. 60 %)
90
800
(approx. 70 %)
107
800
(approx. 40 %)
37
600
(approx. 50 %)
44
(bulb E14, 25 W)
Page 10.
(order from the after-sales service using the order number)
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales service.
We will always find an appropriate solution and will avoid unnecessary visits by engineers.
Trust the expertise of the manufacturer and rest assured that the repair will be carried out by
trained service technicians using original spare parts. The contact details of your local after-
sales service can be found in the enclosed after-sales service directory, or by calling one of
these numbers:
– GB 0844 8928979 (Calls from BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
– IE 01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket.
The
Start/Stop indicator lamp
does not light up.
The Filter/Venting Hose
and
Start/Stop indicator lights
are flashing.
Dryer does not start.
Energy
consumption
in kWh**
The door opens by itself and/or
13 A
the Door indicator light is lit.
Programme terminated shortly
3.50
after starting.
4.20
Water is running out.
4.79
Creasing.
2.37
3.15
3.84
Drying result is not satisfactory
(laundry feels too damp).
1.18
1.48
Drying time too long.
The humidity in the room
increases significantly.
One or more indicator lights for
programme status are flashing.
Mains failure.
The interior light is not working
(depending on model).
Condensation in the exhaust air
duct.
9
Mains plug plugged in?
Programme selected?
Clean the fluff filter under running water
Exhaust air duct blocked or knicked?
Clean the exhaust air duct
Page 6.
If necessary, clean the insect screen on the exhaust air pipe.
Start/Stop button selected?
Door closed?
Programme set?
Push the door closed until you hear it engage.
Ambient temperature higher than 5 °C?
Align dryer horizontally.
Laundry load exceeded?
Remove articles of clothing immediately after
the end of the programme, hang up and pull into shape.
Unsuitable programme selected
Page 7.
Warm laundry feels damper than it actually is.
The selected programme does not suit the load. Use another
drying programme or, in addition, select the time programme
Page 7.
Use fine adjustment for the drying result
Fine layer of limescale on the humidity sensors
Clean the humidity sensors
Page 6.
Programme termination, e.g. tank full, mains power supply failure,
door open or maximum drying time reached.
Rinse the fluff filters under running water
Insufficient supply of air
ensure that air can circulate.
Air inlet possibly blocked
Clear inlet
Ambient temperature higher than 35 °C
Make sure the room is sufficiently ventilated.
Clean the fluff filter under running water
Check installation conditions
Page 8.
Exhaust air duct blocked or knicked?
Clean the exhaust air duct
Page 6.
If necessary, clean the insect screen on the exhaust air pipe.
Switch off, leave to cool down, switch on again, restart
programme.
Remove laundry from the dryer immediately and spread out.
This allows the heat to dissipate.
Pull out the appliance plug, remove the cover cap in the interior
above the door (use Torx 20 screw driver) and replace the bulb.
Close the cover cap.
Never operate the dryer without a cover cap.
Exhaust air duct too long? Check the maximum exhaust air duct
length. Further information
Installation instructions for exhaust
air duct.
Page 4
Page1/2 and 6.
Page 4.
Page 8.
ventilate the room.
Page 4.
10
페이지 인쇄