Draper MC1 배선 매뉴얼 - 페이지 6
{카테고리_이름} Draper MC1에 대한 배선 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper MC1 8 페이지. Low voltage, remote control, serial and network wiring
Draper MC1에 대해서도 마찬가지입니다: 브로셔 (16 페이지), 사용 설명서 (18 페이지)
페이지 인쇄
Draper Low Voltage, Remote Control, Serial and Network Wiring Guide
➀ Wire Screen according to diagram.
➁ Press "Up." If screen goes down, switch red and black wires at switch.
Motor directions will now be reversed.
Wire to connect power to LVC-III should be between 18 AWG and 12 AWG (solid or stranded) 2 conductors with ground. Wire size needs to be suffi cient
to carry the motor load. Red and Black wires are the "open" and "close" leads from the motor. The LVC-III comes enclosed in a metal box conforming to the
National Electric Code (NEC). Wire to connect the switch to the dry contacts on the LVC-III must be 3-conductor.
➀ Wire Screen according to diagram.
➁ Press "Up." If screen goes down, up and down wires
from motor should be switched. Motor directions will now be reversed.
Wire to connect power to LVC-III should be between 18 AWG and 12 AWG (solid or stranded) 2 conductors with ground. Wire size needs to be suffi cient
to carry the motor load. Red and Black wires are the "open" and "close" leads from the motor. The LVC-III comes enclosed in a metal box conforming to the
National Electric Code (NEC). LED switch connects to LVC-III using modular data or telephone cord (RJ11), which must be isolated from the AC power line.
This wire is commonly called Silver Satin. It must be electrically straight (see explanation on page 2). LED switch must be within 1,000 feet of the LVC-III. A dry
contact wall switch may also be connected to the LVC-III using 3-conductor wire.
When a button is pressed, the LED next to the button turns from green to red, and remains red until another button is pressed.
Wiring Diagram for LVC-III with Low Voltage Dry Contact Wall Switch
LVC-III
Wiring Diagram for LVC-III with Low Voltage LED Wall Switch
LVC-III
www.draperinc.com
White-Neutral (Common) to screen & 110-120V AC
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 110-120V AC
Black-to 110-120V AC
Green-Ground
Eye Port
Dry Contacts
3 Button Wall Switch
DOWN - Black
COM - White
UP - Red
Aux Port
Dashed wiring by electrician
Low voltage wiring to switch by others
White-Neutral (Common) to screen & 110-120V AC
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 110-120V AC
Black-to 110-120V AC
Green-Ground
Eye Port
Electrically Straight
Data Cable
Aux Port
Dashed wiring by electrician
(765) 987-7999
page 6 of 8
Black
White
Red
Wall Switch
LED Wall Switch