Bosch WAE20464IL Series 사용 설명서 및 설치 지침 - 페이지 34
{카테고리_이름} Bosch WAE20464IL Series에 대한 사용 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch WAE20464IL Series 40 페이지.
![Bosch WAE20464IL Series 사용 설명서 및 설치 지침](/uploads/products/server2/1364206/1364206.jpg)
Positioning and connecting
en
Model: Standard
■
Model: Aqua-Secure
■
Model: Aqua-Stop
■
Open the water tap carefully,
Note:
checking the leak tightness of the
connection points. The screw
connection is under mains water
pressure.
Water outlet
Caution!
Water damage
If the drain hose slips out of the wash
basin or the connection point during
draining due to high water pressure, any
escaping water may cause water
damage.
Secure the drain hose so that it cannot
slip out.
Notes
Do not kink the water drain hose or
■
put strain on it lengthways.
34
Height difference between the
■
installation surface and the drain:
Min. 60 cm, max. 100 cm
You can lay the water drain hose as
follows:
Drainage into a washbasin
■
:
Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of
scalding if you come into contact
with hot detergent solution (e.g.
when draining hot detergent solution
into a washbasin).
Do not reach into the hot detergent
solution.
Caution!
Damage to the appliance/fabrics
If the end of the drain hose is
immersed in the drained water, water
may be sucked back into the
appliance and may damage the
appliance/fabrics.
Make sure that:
– The plug does not block drainage
from the washbasin.
– The end of the drain hose is not
immersed in the drained water.
– The water drains away quickly
enough.
Drainage into a siphon
■
The connection point must be
secured using a hose clamp with a
diameter of 24-40 mm (available
from specialist dealers).