Draper 17768 사용 설명서 - 페이지 13

{카테고리_이름} Draper 17768에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 17768 20 페이지. 1600w 115v 15kg

10. MAINTENANCE

Always pull out the mains power plug before

starting any cleaning work.

• Keep all safety devices, air vents and the motor

housing free of dirt and dust as far as possible.

Wipe the equipment with a clean cloth or blow it with

compressed air at low pressure.

• We recommend that you clean the device immediately

each time you have finished using it.

• Clean the equipment regularly with a moist cloth and

some soft soap. Do not use cleaning agents or

solvents; these could attack the plastic parts of the

equipment. Ensure that no water can seep into the

device.

• In case of excessive sparking, have the carbon brushes

checked only by a qualified electrician.

Important: The carbon brushes should not be replaced

by anyone but a qualified electrician.

10.3 CHECK THE OIL LEVEL - FIG. 6

Check the oil level before using the machine.

Place the machine on the floor with the tool

mounting pointing downwards. The oil must be at

least 3 mm above the bottom edge of the inspection

window

Changing the oil: The oil should be changed after

around 40-50 hours of use.

Recommended oil: 25ml SAE 15W/40 or an

alternative of the same quality.

FIG.6