Draper 400W 대상 지침 - 페이지 12

{카테고리_이름} Draper 400W에 대한 대상 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 400W 20 페이지.

BASIC JIGSAW OPERATION

IMPORTANT: Make sure that the mains voltage

matches the voltage stated on the machines rating

plate.

9.1 SWITCH OPERATION - FIG. 2

TRIGGER SWITCH

i. To start the jigsaw, pull, and hold, trigger

ii. Release the trigger

motor.

CAUTION! The saw blade may continue moving for

a couple of seconds after the switch is released.

TRIGGER LOCK

When using the jigsaw for longer cuts it is possible

to lock the trigger on.

i. Pull and hold trigger

ii. Press and hold lock button

iii. Release trigger

iv. Release the lock button

v. To release the lock, pull and release the

trigger once.

IMPORTANT: Due to the shape of the body, these

machines can be operated with only one hand, but

for reasons of safety it is strongly advised to keep

both hands on the machine during use.

SPEED ADJUSTMENT

Depending on the material type, the blade speed

can be adjusted.

i. Rotate the dial

to fast (setting No.6).

NOTE: Applying pressure on the blade can overload

the motor and result in damage.

to cut power to the

from slow (setting No.1),

FIG.2