Draper 58157 사용 설명서 - 페이지 6

{카테고리_이름} Draper 58157에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 58157 12 페이지. 10 tonne hydraulic bench press

OPERATING INSTRUCTIONS

PUMP UNIT

1. Connect the hydraulic ram and pump unit hose

together, ensure you have securely fastened the

couplings before pumping.

2. Firmly close the release valve ✪✌ by turning it in

a clockwise direction. Fig. 1.

3. Apply pressure to the pump ✫✌ by pumping the

handle ✬✌ up and down. Fig. 1.

4. To release the pressure turn the valve

anti-clockwise.

NOTE: The pump can be used in any position, i.e.

horizontal to vertical. Always keep the hose

end of the pump unit facing downwards when

positioned vertically. Fig. 2.

POSITIONING

To move the ram ✭✌ into the required

Ram:

position loosen the bolts ✮✌ and slide

into place. Tighten the bolts before

operating the ram. Fig. 3.

Work table: The height of the work table ✯✌ is

adjusted by removing the support pins

✰✌ and relocating in a higher or lower

hole in the main frame ✱✌.

NOTE: The table should always remain

level.

Fig. 1

✫✌

Fig. 2

Fig. 3

Fig. 4

- 6 -

✬✌

✮✌

✯✌

✰✌

✱✌

✪✌

✭✌