Draper 65027 사용 설명서 - 페이지 7

{카테고리_이름} Draper 65027에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 65027 12 페이지. 110v/230v router

페이지 인쇄

1. Operation and Use

IMPORTANT

Check before plugging in that the mains voltage

agrees with the voltage specified on the rating

plate of the machine.

Before operating the router fit the screen ✪✌ and

dust extraction outlet ✫✌. The screen ✪✌ is

secured in place with screw ✬✌ and the dust

extraction outlet ✫✌ by two bolts and wing nuts

✭✌ (Fig.2).

SWITCH

The machine is fitted with a slide switch ✮✌. The

slide is pushed upwards to start (I = on) and

downwards (O = off) to stop (Fig.3).

WARNING

Make sure the switch is in the off position

before connecting to the mains.

SPEED CONTROL

In order to improve the machines performance,

and provide maximum working efficiency on all

types of material, the R1900V has an electronic

speed control knob.

The knurled knob ❁✌ is mounted on the body of

the machine and is marked with numbers from 1

to 6. Minimum speed is at position 1 and the

speed progressively increases to maximum

speed at position 6.

Carefully choose the ideal speed for the work

that has to be performed by carrying out

preliminary tests (Fig.4).

This model is also fitted with an electronic speed

regulation system with the following

specifications:

– "Soft Start" starting: allows gradual collet

rotation starting and reaching of maximum pre-

fixed speed in three seconds.

– "Constant Electronic": maintains the preset

rotation speed constant, whatever the diameter

of the bit inserted in the collet and the friction

generated by the material.

– Current limiter: a safety device which reduces

the electric power supply of the tool to a

minimum, when there is an overload of 1600W.

The router must always be held by both hand

grips ✯✌ (Fig.3). The on/off switch ✮✌ must be

operated with your left hand.

OPERATION AND USE

Fig.2

✭✌

Fig.3

✯✌

Fig.4

- 6 -

✪✌

✬✌

✫✌

✯✌

✮✌

❁✌