Draper 83646 사용 설명서 - 페이지 5

{카테고리_이름} Draper 83646에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 83646 16 페이지. 2000w 230v hot air gun

INTRODUCTION

Ideal for paint stripping, thawing pipes and other domestic and light commercial applications.

Stock No... .......................................................................................................................... 83646

t r

. . .

Rated voltage .............................................................................................................230V~50Hz

Rated input........................................................................................................................ 2000W

Temperature (approx.)

Setting 1 .....................................................................................................................50ºC

Setting 2 ...................................................................................................................450ºC

Setting 3 ...................................................................................................................600ºC

Air flow volume

Setting 1 ............................................................................................................. 500L/min

Setting 2 ............................................................................................................. 250L/min

Setting 3 ............................................................................................................. 500L/min

Weight (machine only) ..................................................................................................... 0.83kg

4.3 HANDLING & STORAGE

Although this machine is small in size, care must still be taken when handling and lifting.

Dropping this machine will have an effect on the accuracy and may also result in personal

injury. This machine is not a toy and must be respected.

The environment will have a negative result on its operation if you are not careful. If the air

is damp, components will rust. If the machine is unprotected from dust and debris;

components will become clogged: And if not cleaned and maintained correctly or regularly

the machine will not perform at its best.

IMPORTANT: Please note this machine is fitted with a safety thermal overload protection. If

the product, is used continuously too close to the work piece (i.e. misused) resulting in over

heating and the machine potentially catching fire, the thermal overload protection will be

activated and stop the heating element from operating within the machine. This will cause

the gun to blow cool air until the inner components of the heat gun have cooled sufficiently.

This process takes approximately 2 minutes. Repeat overloading will lead to perminant

damage.

Remember the nozzle will remain hot for sometime - a safe storage location should be used.

Store in a dry location out of the reach of children.

. . .