Draper BMSM 사용 설명서 지침 - 페이지 14

{카테고리_이름} Draper BMSM에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper BMSM 20 페이지. Bench mounted spindle moulder

ASSEMBLY

- ATTACHING THE MITRE GUIDE (Fig.20):

- The mitre guide

to perform angles cuts, it simply slides into the work

table slot. Fig.20.

- The spindle moulder is supplied with a selection of

insert plates

depending upon the router bit size. Fig.21.

- Router bit shank reducing collets (Figs.22 - 24):

- Select the correct collet that matches the shank of the

router bit and screw onto threaded spindle.

- Ensure the collet is tight and the bit secure by using the

spanner supplied, the spindle lock can be seen in the

picture being depressed to lock the spindle allowing

proper use of the spanner. Figs.23 & 24.

is used when the operator wishes

, 1,2 or 3 of them can be fitted

FIG.20

FIG.21

Fig.22.

FIG.22

FIG.23

- 13 -