Draper HG2000D 사용자 설명서 - 페이지 11

{카테고리_이름} Draper HG2000D에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper HG2000D 16 페이지.

BASIC HEAT GUN OPERATIONS

8.1 SAFETY SWITCH – FIG.1

The ON/OFF switch (2) has four positions/settings.

Position 0 is off.

Position 1 is "cool heat" which is a steady 50°C heat

(approx.) at 500 L/min.

Position 2 is heat approximately 450°C (approx.) at

250 L/min.

Position 3 is heat approximately 600°C (approx.) at

500 L/min.

8.2 FREESTANDING OPERATION –

FIG.2

This heat gun can be positioned freestanding. This

allows the user to have both hands free which is

essential for certain applications, e.g. pipe bending,

plastic welding, etc. Position the heat gun on it's end,

only on a level suitable surface.

Note: Never leave the heat gun unattended or

switched on.

The following instructions on next page should only be

used as a guide as the ideal temperature should be

ascertained by performing a test on the workpiece.

Heating efficiency will vary depending on the

properties of the workpiece, and the distance kept

between the metal nozzle and the workpiece itself.

FIG.1

FIG.2

- 11 -

(2)