Draper Storm Force 83648 사용 설명서 지침 - 페이지 5

{카테고리_이름} Draper Storm Force 83648에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper Storm Force 83648 20 페이지. 400w 230v oscillating multi-tool kit

INTRODUCTION

For detail and finishing work such as sanding, cutting, scraping, etc. It is intended for

domestic and light commercial use only. Any other application is considered as misuse.

Stock no. ............................................................................................................................. 83648

Part no. .......................................................................................................................... MT400SF

Rated voltage .............................................................................................................230V~50Hz

Rated input ........................................................................................................................ 400W

Revolutions per minute (no load) .................................................................15,000-22,000opm

Sound pressure level .................................................................................................. 84.51dB(A)

Sound power level ..................................................................................................... 95.51dB(A)

Vibration level ...............................................................................................................3.844m/s

Weight .............................................................................................................................. 1.45kg

4.3 HANDLING & STORAGE

Although this machine is small in size, care must still be taken when handling and lifting.

Dropping this machine will have an effect on the accuracy and may also result in personal

injury. This machine is not a toy and must be respected.

The environment will have a negative result on its operation if you are not careful. If the air

is damp, components will rust. If the machine is unprotected from dust and debris;

components will become clogged: And if not cleaned and maintained correctly or regularly

the machine will not perform at its best.