Draper 56382 매뉴얼 - 페이지 12

{카테고리_이름} Draper 56382에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 56382 20 페이지. Sds + rotary

BASIC HAMMER DRILL OPERATIONS

Warning! Prior to beginning any drilling, carefully

check the surface for the presence of electric cable,

gas or water pipes and other dangerous or damaging

contents. If unsure do not proceed.

Note: Remove the plug from the socket before

carrying out adjustment, servicing or maintenance.

9.1 ROTARY/HAMMER AND

DRILLING/ROTATIONAL

CHISELLING/CHISELLING SELECTOR

SWITCHES – FIGS. 3 - 6

Note: The 4 function selector switch

a safety button

rotating the switch to the desired position.

9.2 ROTARY DRILLING - FIG.3

– Rotate the function selector

setting.

This setting is for using the drilling action without

hammer.

9.3 HAMMER AND DRILLING - FIG.4

– Rotate the function selector

and drill setting.

This setting is for hammer drilling.

9.4 ROTATIONAL CHISELLING - FIG.5

– Rotate the function selector

chiselling setting.

This setting is for chiselling with a freely rotating

chisel.

9.5 CHISELLING - FIG.6

– Rotate the function selector

setting.

This setting is for chiselling with a fixed chisel.

. Press the button in whilst

to the rotary drill

to the hammer

to the rotational

to the chiselling

incorporates

FIG.3

FIG.4

FIG.5

FIG.6

- 12 -