Draper GD16 사용 설명서 - 페이지 14

{카테고리_이름} Draper GD16에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper GD16 20 페이지.

1. The table ✰✌ Fig. 17 can be raised or

lowered on the drill press column by

loosening the table clamp handle ✱✌ and

turning the table raising and lowering handle

✲✌. After the table is at the desired height,

tighten handle ✱✌.

2. The table can be rotated 360º on the table

bracket by loosening lock handle ✳✌ Fig. 18.

3. The table can be tilted right or left by

unscrewing and removing the table alignment

grub screw Fig. 19.

4. Fig. 18 illustrates the table alignment grub

screw removed. Loosen table locking bolt

✴✌(Fig.19) tilt table to desired angle.

Retighten bolt ✴✌. When returning table to

the level position replace table alignment

grub screw. This will automatically position

the table surface at 90º to the spindle.

5. A tilt scale ✵✌ Fig. 20 is provided on the

table bracket casting to indicate the degree

of tilt. A cursor line ✶✌ is also provided on

the table to line up with the scale.

OPERATION AND USE

Fig.17.

✰✌

✳✌

Fig.18.

Fig.19.

✶✌

Fig.20.

- 13 -

✲✌

✴✌

✵✌

✱✌