Draper 64260 사용 설명서 - 페이지 8
{카테고리_이름} Draper 64260에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 64260 12 페이지. Oil free compressors
페이지 인쇄
MAINTENANCE
IMPORTANT:
Fig.5.
Before performing any maintenance
operations, disconnect the compressor from
the power supply and release all the air from
the receiver, until the pressure gauge reads
zero.
EVERY DAY:
Drain the condensate from the receiver. The
drain (H) Fig. 5. is situated on the underside
of the receiver tank for the DA25/200,
Fig.6.
Fig.6.
DA25/180 and on the end of the tank f or the
DA6/200.
(J)
(J)
EVERY MONTH:
Clean the air suction f ilter using compressed
air. Replace the filter every 50 hours of use.
EVERY 100 HOURS:
Clean all the external surfaces of the pump
unit and motor. Ensure that neither the motor
fan cowling (J) or head cooling fins are
blocked or obstructed in any way. See Fig.6.
(K)
EVERY 200 HOURS:
Check the condition of the v alves and replace
them if they are damaged or worn.
PRESSURE SWITCH SETTINGS (DA6/200,
DA6/201, DA25/180, DA25/200):
The delivery pressure setting can drift over
a period of time and will require periodic
adjustment. Ensure that the pressure switch
settings are correctly adjusted and maintained
at the correct level. This will help prevent
faults occurring which can result in reduced
performance and possible failure.
PRESSURE SWITCH ADJUSTMENTS
(DA6/200, DA6/201, DA25/180, DA25/200):
To adjust the pressure level at which the cut-
out and cut-in functions, remove the switch
cover and turn the pressure regulating screw
(K) clockwise to increase the level and
anticlockwise to decrease the level. See Fig.7.
WARNING:
DO NOT ADJUST THE CUT-OUT PRESSURE
ABOVE THE MAXIMUM PRESSURE AS PER
THE MACHINE SPECIFICATION.
- 7 -