Draper 02519 매뉴얼 - 페이지 17

{카테고리_이름} Draper 02519에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 02519 20 페이지. 230v router
Draper 02519에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지)

페이지 인쇄
Draper 02519 매뉴얼

10. MAINTENANCE AND TROUBLESHOOTING

10.1 MAINTENANCE

Regular inspection and cleaning reduces the necessity for maintenance operations and will keep
your tool in good working condition.
The motor must be correctly ventilated during tool operation. Avoid blocking the air inlets and
vacuum the ventilation slots regularly.

10.2 TROUBLESHOOTING GUIDE

Problem
Motor does not start.
Machine vibrates.
Bit will not cut.
Important: All repairs/servicing should be carried out by a qualified person.
Possible Cause
1. Fuse.
2. Brushes worn.
3. Unsure.
1. Router bit not suitable for
application.
2. Router bit blunt.
3. Incorrect direction of
travel.
1. Attempting to remove
excess material.
2. Router bit blunt.
3. Incorrect direction of
travel.
– 17 –
Remedy
1. Replace/reset 13 amp
time delay fuse or circuit
breaker.
2. Return to an authorised
service agent for brushes
replacement.
3. Return to an authorised
service agent for
diagnosis.
2. Seek guidance on bit
selection.
2. When machine has
stopped, replace bit.
3. Change direction of travel.
3. Reduce plunge depth.
2. When machine has
stopped, replace bit.
3. Change direction of travel.