Draper 02520 매뉴얼 - 페이지 5

{카테고리_이름} Draper 02520에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 02520 20 페이지. 230v router
Draper 02520에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지)

INTRODUCTION

4.1

This bench grinder uses abrasive discs to grind masonry, metal and other materials.

This product is suitable for enthusiasts and tradespersons alike. Any application other than that it

was intended for is considered misuse.

4.2

Stock No's. ............................................................ 29620 ...................................................... 29621

Part No's. ............................................................. GHD150 ................................................ GHD200

Rated voltage .................................................... 230V~50Hz ........................................ 230V~50Hz

Rated input ............................................................. 370W ........................................................550W

Wheel dimensions

Diameter ........................................................150mm .................................................. 200mm

Bore .............................................................. 12.7mm ..................................................... 16mm

Width/face ......................................................19mm ...................................................... 25mm

Speed (no load) .................................................. 3,000r/min ........................................... 3,000r/min

Sound Pressure Level ........................................ <70dB(A) ............................................. <70dB(A)

Weight (net/gross) .............................................. 11kg/12kg .............................................21kg/22kg

4.3

− Care must be taken when handling this product.

• Dropping this power tool could have an effect on its accuracy and could also result in

personal injury. This product is not a toy and must be respected.

− Environmental conditions can have a detrimental effect on this product if neglected.

• Exposure to damp air can gradually corrode components. If the product is unprotected from

dust and debris, components will become clogged.

• If not cleaned and maintained correctly or regularly, the machine will not perform at its best.

– 5 –