Draper 63129 사용 설명서 - 페이지 7
{카테고리_이름} Draper 63129에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 63129 12 페이지.
IMPORTANT – Make sure that the mains voltage matches
the voltage stated on the machines rating plate.
FITTING THE GUARD
Before fitting the disc to the machine, the protective guard
must be fitted and adapted to working requirements.
Fitting the guard:
– Fit the collar of guard ✭✌ on flange ✮✌, the guard can
only be fitted on, in one position. Line up the lugs, insert
and twist to your preferred position.
– Tighten screw ✯✌ make sure that the guard is securely
fixed to the flange. (Fig.2).
CAUTION
Never fix the guard with the splinter deflector facing
outwards.
FITTING THE ABRASIVE DISC
Fit flange ✲✌ and ensure it engages with the flats on the
spindle ✴✌. (Fig.2).
– Place the disc on the shaft.
– Lock the spindle with button ✱✌ on the head of the
machine. (Fig.3).
– With the spindle locked, screw the flange nut ✰✌ on to
the spindle (NOTE: Boss towards grinding disc, and away
from cutting disc) and then tighten with pin spanner
which is supplied with the machine.
REMOVING THE DISC
In order to replace the disc, carry out the above procedure
in reverse.
OPERATION & USE
Fig.2
✮✌
✯✌
✭✌
✳✌
Fig.3
- 6 -
✴✌
✲✌
✰✌
✱✌