Draper D20 98104 빠른 시작 매뉴얼 - 페이지 7

{카테고리_이름} Draper D20 98104에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper D20 98104 14 페이지. 20v brushless 125mm/115mm angle grinder

페이지 인쇄

– The battery is to be disposed of in-line with local

authority procedures.

– Do not crush, open or burn the battery. Exposure to

potentially harmful materials may occur.

– In case of fire use CO2 or dry chemical extinguisher.

– Do not expose to high temperatures >50°C. The

battery may degrade at high temperatures.

– Charge battery in conditions between 5°C to 30°C

with the designated charger for the battery.

– Do not use battery if it has been stored at 5°C or

less. Allow it to "normalise" at room temperature

before usage/charging.

Warning! – Leaking battery packs

– The electrolyte in battery packs is corrosive. Avoid

contact with the skin.

– If contact is made, flush the area with clean water,

pat dry and seek medical attention at the

earliest opportunity.

– Inform medical personnel that the contaminant is a

"high alkaline, corrosive liquid".

– If electrolyte comes into contact with the eyes, flush

with copious amounts of water only.

Seek immediate medical attention, relaying the

information above.

3.4 CONNECTION TO THE POWER

SUPPLY (CHARGER)

Caution: Risk of electric shock. Do not open.

This appliance is supplied with an approved plug and

cable for your safety. The value of the fuse fitted is

marked on the pin face of the plug. Should the fuse

need replacing, ensure the substitute is of the correct

rating, approved to BS1362 and ASTA

marked.

Ensure the fuse cover is replaced before attempting to

connect the plug to an electrical outlet. If the cover is

missing, a replacement must be obtained or the plug

replaced with a suitable type.

If a replacement plug is to be fitted this must be carried

out by a qualified electrician.

Never use a damaged or incomplete plug.

This appliance is Class II

connection to a power supply matching that detailed on

the rating label and compatible with the plug fitted.

Carefully select an extension lead. Some machines are

not suitable for use with extension leads. If the tool is

designed for use outdoors, only use an extension lead

suitable for that environment in conjunction with an RCD

adaptor. When using an extension lead, select one

capable of handling the current (amps) drawn by the

machine in use. Ensure the cable is fully unwound

regardless of the distance between the power supply

and the tool. Excess current (amps) and a coiled

extension lead will cause the cable to heat up and can

result in fire.

or BSI Kite

and is designed for

†

Keep extension leads away from moving hazardous

parts to avoid damages to the cable which can lead to

contact with live parts. Position cable safely to avoid

tripping over.

Double insulated

†

connection as supplementary insulation is applied to the

basic insulation to protect against electric shock in the

event of failure of the basic insulation.

Important! If using an extension lead, follow the

instructions that came with your lead regarding

maximum load while cable is wound. If in doubt, ensure

that the entire cable is unwound. Using a coiled

extension lead will generate heat which could melt the

lead and cause a fire.

UNPACKING AND

CHECKING

4.1 PACKAGING

Carefully remove the product from the packaging and

examine it for any sign of damage. Check contents

against the parts shown in Fig A. If any part is damaged

or missing, please contact the Draper Help Line (see

back page). Do not attempt to use the product!

The packaging material should be retained during the

warranty period, in case the product needs to be

returned for repair.

Warning!

•

Some of the packaging materials may be harmful to

children. Do not leave any of these materials in

reach of children.

•

If any of the packaging is to be thrown away, make

sure they are disposed of correctly, according to local

regulations.

– 7 –

: This product requires no earth

