Draper Stormforce 98437 매뉴얼 - 페이지 13

{카테고리_이름} Draper Stormforce 98437에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper Stormforce 98437 20 페이지. Angle grinder/cut-off tool

PREPARING THE ANGLE GRINDER

8.1

Warning! Prior to mounting an abrasive wheel ensure the expiry date has not expired, rendering it

potentially hazardous.

Warning! Selection of the correct accessory, suitable for the intended application is vital. Seek

guidance if uncertain of selection.

Warning! The rated (no load) revolutions per minute of the tool must not exceed the speed

capacity of the accessory. Please refer to the accessory manufacturers instructions for information.

Visual Inspection:

– Prior to fitting, abrasive/superabrasive wheels shall be subject to a visual inspection.

Inspection:

– Each time after mounting, the abrasive/superabrasive wheel shall be test run for a reasonable

time.

– The specified maximum operating speed of the wheel shall not be exceeded.

– Damaged abrasives shall be destroyed.

– Always wear approved safety goggles.

– 13 –