FlexShade
®
Section 8 - 12 Volt Motor Limits
Move shade to desired
highest or lowest
position by pressing
UP or DOWN buttons
on controller.
Important: Cycle shade up and down prior
to setting limits to settle fabric.
Adjusting Upper Limit
Hold UP and STOP on controller.
For 10-15 seconds screen will time
out on remote: continue holding.
Motor Response:
Approx.
10-15
sec
5
SECS
5
SECS
Adjusting Lower Limit
Hold DOWN and STOP on controller.
For 10-15 seconds screen will time
out on remote: continue holding.
Motor Response:
Approx.
10-15
sec
5
SECS
Disable limit setting function of remote
5
SECS
P2
+
+
5
SECS
15 Channel Remote
Press right button for 1 second or less to display current mode.
RESPONSE
LCD displays "L" when locked
LCD displays "U" when unlocked
Recharge
hold both UP and STOP.
Move shade to desired
5
SECS
5
SECS
5
SECS
5
SECS
Move shade to desired
5
SECS
5
SEC S
5
SECS
5
SECS
5
SECS
Important: It is still possible to
add/delete channels and perform
P2 functions while lock function
is enabled.
5
SEC S
Important: This mode is intended
to be used after all shade
programming is completed.
Locked Mode will prevent
accidental or unintended
5
changing of limits.
SECS
5
SECS
1 Channel Remote
RESPONSE
LED solid on when locked
LED blinking when unlocked
To save upper limit,
Motor Response:
Approx.
position by pressing
5
SECS
UP or DOWN button.
5
Motor Response:
Approx.
5
SECS
position by pressing
UP or DOWN button.
5
5
SEC S
Motor Response:
Approx.
Reverse Motor Direction
5
SECS
Press and hold P1 button on motor for 10 seconds, 3 jogs and 3 beeps.
5
5
SEC S
JOG
1
X
Important: Reversing motor direction using this method is possible
5
SECS
at any time.
Factory Reset
Press and hold P1 button on motor for 14 seconds, 4 jogs and 4 beeps.
JOG
1
X
Important: Resetting motor to factory settings will erase all programming,
including any set limits.
To save lower limit,
hold DOWN and STOP.
5
SECS
To save upper limit,
5
SECS
hold UP and STOP.
5
SECS
SECS
5
SECS
5
SECS
5
SEC S
5
SECS
To save lower limit,
hold DOWN and STOP.
5
SECS
SECS
5
SECS
5
SECS
5
SECS
5
SEC S
5
SECS
Approx.
SECS
5
SECS
Motor Response:
JOG
1
X
5
SECS
JOG
JOG
1
1
X
X
page 6 of 11
Important: After
setting limits, motor
will automatically
exit from initial
programming mode.
5
SECS
5
SECS
5
5
SECS
SECS
5
SECS
5
SECS
5
SECS
10
SEC
5
SECS
BEEP
3
X
JOG
1
X
Approx.
14
SEC
Motor Response:
BEEP
4
X
JOG
1
X
페이지 인쇄