Draper 56490 사용 설명서 - 페이지 14

{카테고리_이름} Draper 56490에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 56490 20 페이지. 230v mini belt sander

페이지 인쇄

BASIC SANDING OPERATIONS

9.1 POSITIONING THE SANDING ARM

– FIG.10

The sanding arm can be rotated approximately

120˚ in relation to the handle, for operational

convenience and efficiency.

Warning! Always ensure that the machine is

disconnected from its power source before

attempting to re-position the sanding arm.

To adjust the sanding arm angle:

– Push the sanding arm locking lever

to release the sanding arm.

– Re-position the sanding arm to the required

angle.

– Pull the sanding arm locking lever back to

secure the arm at the new position.

9.2 TRIGGER SWITCH – FIG.11 – 12

Note: Remove the plug from the socket before

carrying out adjustment, servicing or maintenance.

Prior to connecting this machine to the power

supply ensure the trigger lock is disengaged.

Ensure the sander is raised off the workpiece.

– Press trigger

– To operate the sander for a prolonged period;

● Press and hold trigger

● Press and hold locking button

● Release trigger

– The sander will now continue to run until the

trigger is pressed, automatically releasing

button (Fig.12).

– Wait for complete run-down before putting the

tool aside.

This machine is intended for sanding wood only.

Replace abrasive belts when clogged with material

or when surface/edge has rips, cracks or worn

areas.

Warning! Hearing protection should be worn when

using belt sanders.

9.3 VARIABLE SPEED CONTROL –

FIG.13

Use the variable speed control dial

working speed as appropriate.

to start the sander.

. Release button

to adjust

forward

FIG.10

FIG.11

FIG.12

FIG.13

- 14 -

120º

APPROX.