1More ComfoBuds 사용자 설명서 - 페이지 2
{카테고리_이름} 1More ComfoBuds에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 1More ComfoBuds 2 페이지. True wireless headphones
페이지 인쇄
英文
Power
Power On：Uncover the charging case,
the headphones will turn on automatically.
* Above functions are available for either earbud in individual or Stereo mode.
Headphones Pairing
The headphones will automatically
pair to each other after the lid is
open when they are in the case.
Battery Noti cation
LED indicator for low battery:
when there is 25-30 minutes
of use left, you will hear the
noti cation sound and the
LED indicator will ash red.
Tap Controls
Phone calls and music can be controlled by tapping the outside of the earbuds.
Phone Call
Answer/End call:
Double-tap
Voice control on cellphone:
Tap 3 times when Bluetooth
on and no phone calls
* To decline a call, please operate on paired mobile phone.
* To change a song or control volume, please set up on 1MORE MUSIC APP or operate on
paired mobile phone or device.
* Above functions are available for either earbud in individual or Stereo mode.
* Above functions may vary with different devices.
1MORE (1) Year Limited Warranty
1MORE warrants to the original retail purchaser that this product is to be free from defective materials
and workmanship for a period of one year from the date of purchase if it is properly used and
maintained. If this product proves defective in either material or workmanship, 1MORE, at its option,
will (a) repair the product with new or refurbished parts, or (b) replace the product with an equivalent
new or refurbished product, at no charge for parts or labor. If the product model is no longer available
and cannot be repaired effectively or replaced with an identical model, 1MORE at its sole option may
replace the unit with a current model of equal or greater value. In some cases, modi cation to the
mounting surface may be required where a new model is substituted. 1MORE assumes no
responsibility or liability for such modi cation. TO OBTAIN A REPAIR OR REPLACEMENT UNDER THE
TERMS OF THIS WARRANTY, PLEASE RETURN TO THE ORIGINAL DEALER FIRST AND THE
ORIGINAL DEALER SHALL REPAIR THE PRODUCT WITH NEW OR REFURBISHED PARTS OR
REPLACE THE PRODUCT WITH AN EQUIVALENT NEW OR REFURBISHED PRODUCT.
You will be required to submit a proof of purchasing details, including but not limited to a receipt or
sales invoice.
Return shipping for exchanges/repairs is the sole responsibility of the original retail purchaser.
Limitations:
• This limited warranty does not cover the failure of the product resulting from improper installation,
misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental deterioration.
• This limited warranty does not cover cosmetic damage, including paint damage, or consequential
damage to other components or premises which may result for any reason from the failure of the product.
• This limited warranty is null and void for products not used in accordance with 1MORE's instructions.
• This limited warranty is null and void for products with altered or missing serial numbers and for products
not purchased from an AUTHORIZED dealer.
• This limited warranty terminates if you sell or otherwise transfer this product to another party.
FAQ
1. Why the headphones cannot be turned on?
Check if your headphones have enough battery life. If not, please charge them for at least 30 minutes.
2. Why the headphones cannot connect to my cellphone, or take a long time to connect?
1) If the earbuds cannot pair to one another, and only one earbud will pair with your cellphone, then put
both buds back into the charging case and quickly press the pairing button 3 times, click the device
name, they should now pair correctly to the phone.
2)
To pair the earbuds to a new cellphone, simply place them into the charging case and depress the
pairing button for 3 seconds. Then click the new device name and pair with the new cellphone.
3. Why the headphones cannot play music after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your
device name and make sure the "Media Audio" option is on.
4. Why there is no sound from the headphones while making phone calls after successfully connecting
to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your
device name and make sure the "Phone Audio" option is on.
5. Why the Bluetooth connection is not stable and causes some interruptions?
1) Try shortening the distance between your headphones and device. Avoid solid barriers in between.
2) Please keep away from strong interference sources, such as Wi-Fi and GPRS.
3) Please make sure the Bluetooth antenna of your device is not blocked.
6. Why some control functions do not match those in the manual while using third party music/video
player Apps?
Your operating system and the third party music/video player apps may have different settings for the
in-line remote control functions. We recommend that you use the music/video player apps that your
device has originally provided.
7. I turned the headphoens up to the maximum volume, but why the actual volume still sounds low?
In different operating systems, especially some Android systems, the headphones and your device
have separate volume control systems. Please adjust the volume controls on both the device and the
headphones according to your preference.
* For more detailed product FAQs, please visit the product support section under www.1more.com
Warning
Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching re,
explosion, leakage of corrosive electrolyte etc);
Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that
can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that can result in an
explosion or the leakage of ammable liquid or gas; and A battery subjected to extremely low air
pressure that may result in an explosion or the leakage of ammable liquid or gas.
The symbol indicates DC voltage.
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European directive 2014/53/EU in order to
be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when
he buys a new electrical or electronic equipment.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identi er:
Trade Name: 1MORE
Model No.: ESS3001T
Responsible Party – U.S. Contact Information
1MORE USA, Inc.
Address: 10225 Barnes Canyon Road, Suite A202, San Diego, California, 92121
Tel: 1-855-551-6673
E-Mail: [email protected]
Complies with
IMDA Standards
[199201864D]
Model: ESS3001T
Headphone Weight
(Single)
Case Weight: 28.9 g
Product Weight: 36.5 g
Headphone Size: 39.2 × 17.9 × 18.7 mm
Case Size: 68.7 × 30 × 25 mm
Impedance: 30 Ω
Wireless Range: 10 m
Headphone Battery Capacity
Case Battery Capacity: 410 mAh
Headphone Charging Time: 85 mins
Case Charging Time: 80 mins
The specifications are acquired from laboratory tested data.
* The playback time, tested under the laboratory condition of AAC format and 50% volume, may vary with different device
setting, environments, usage and other factors.
Manufacturer: Tiinlab Acoustic Technology Limited
Address: Tianliao Building 1403, Zone A Tianliao Industrial Park, Taoyuan Str.,
Nanshan Dist., Shenzhen, P.R. China
Product information can be found at www.1more.com
Power Off：Put the headphones back into
the charging case and close the lid, they will
automatically turn off and start charging.
When case battery is too low on charge,
LED indicator will ash red.
Battery Life
: 3.8 g
* Headphones fully charged
Playback Time: 4 hours*
* Headphones and case fully charged
Playback Time: 18 hours*
®
Bluetooth: Bluetooth
5.0
Bluetooth Protocol: HFP / A2DP / AVRCP
Input: 5V
0.5A
: 35 mAh
Working Temperature: 0 ℃ ~ 45 ℃
(Single)
Frequency Band: 2.400 GHz ~ 2.4835 GHz
In The Box
Placement
Bluetooth Pairing To The Device
1. To connect to your device during rst use, turn the
headphones on to enter pairing mode. Headphones
will power off if not paired to a device within 3 minutes.
2 . After rst successful pairing, headphones will
automatically connect to your device.
3 . To pair with a new device: put headphones back into
the case, press and hold the pairing button for 3
seconds and select the new device name when
powered on (no music or phone calls) to re-enter
pairing mode.
* Above functions are available for either earbud in individual or Stereo mode.
Charging Methods
With the Type-C cable, a full charge
will take around 80 minutes.
Smart Playback
To stop playback intuitively when taking out your headphones, and to resumes playback when
putting them back in.
To turn off Auto-Play connect the headphones to the 1MORE MUSIC APP.
Playback
Extra Functions
Play/Pause:
1. If the headphones cannot pair normally when powered on, open the case and quickly click the
Double-tap
pairing button 3 times to reset the Left & Right pairing process.
2. To unpair the cellphone:
Put both L & R into the case, and then press and hold the pairing button for 8 seconds.
3. OTA Firmware Update: can be done synchronously with 1MORE MUSIC APP when Left and Right
headphones Bluetooth paired to each other.
* Functions of 1MORE MUSIC APP may vary with different cellphones or operating systems. For
more details, please contact our customer service.
We Appreciate Your Business
We know you will enjoy new 1MORE headphones as much as we do. At 1MORE, we value your
satisfaction. If you would like more details on this product or any of our other products, please visit
us online by scanning the QR code. Go to www.1more.com and sign up for VIP, and 1MORE will
treat you like one.
Tips
1. Please read this instruction manual carefully and retain for future reference.
2. Please fully charge the battery before rst use.
3. If the headphones have been unused for more than 3 months, we recommend that you charge
them. This will improve battery capacity.
4. Only use charging cables and adapters that are FCC (Federal Communications Commission)
approved.
5. In dry environments, static electricity may numb your ear. This is not related to the quality of the
product.
Safety Information
1. Never disassemble the headphones. There are no user-serviceable parts inside.
2. Do not expose the headphones to temperatures below 32 °F (0 °C) or to temperatures above
113 °F (45 °C).
3. Do not use the headphones in a thunderstorm storm. This could prevent the headphones from
working properly, and also increase your chance of being electrically shocked.
4. Do not use oil or any volatile liquid to clean this product.
5. Do not listen at high volumes for extended periods of time.
6. Do not use the headphones in traf c. Do not use the headphones any time it would be dangerous
to be unaware of noises around you.
7. Adult supervision is required for children of age 6 and under.
WEEE
Electrical and electronic equipment, parts and batteries marked with this symbol must not be
disposed of with normal household wastage, it must be collected and disposed of separately
to protect the environment.
Your 1MORE retailer will advise you of the correct way of disposal in your country.
Safety Caution
Do not expose batteries or battery packs to excessive heat such as sunshine, re or the like.
CE
Declaration of Conformity Hereby, Tiinlab Acoustic Technology Limited declares that the radio
equipment type 1MORE ComfoBuds True Wireless In-Ear Headphones of ESS3001T is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address:www.1more.com
RF exposure information: The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction. Radiation Exposure
Statement Power is so low that no RF exposure calculation is needed.
Declaration for EU Compliance
Operation Frequency/Max. EIRP: 2402-2480MHz, Max. EIRP is 2.22dBm.
FCC
The device has been evaluated to meet general RF exposure requirement, The device can be used in
portable exposure condition without restriction. Federal Communication Commission (FCC) Radiation
Exposure Statement Power is so low that no RF exposure calculation is needed.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications or changesto this equipment. Such modifications or changes could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s).
Son fonctionnement est soumis aux deux conditions suivantes:
(1) cet appareil ne peut pas provoquer d'interférences, et (2) cet appareil doit accepter toute
interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled
environment and are safe for intended operation as described in this manual. The further RF
exposure reduction can be achieved if the product can be kept as far as possible from the user
body or set the device to lower output power if such function is available.
Déclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis
et le Canada établies pour un environnement non contrôlé.
Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux
expositions RF peut être augmentée si l'appareil peut être conservé aussi loin que possible du
corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une
telle fonction est disponible.
Headphones × 1 Pair
Charging Case
With the charging case, a full charge will
take around 85 minutes.
Type-C Charging Cable × 1