Drawell DV-8000 Series 사용자 설명서 - 페이지 5
{카테고리_이름} Drawell DV-8000 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Drawell DV-8000 Series 10 페이지. Spectrophotometers
페이지 인쇄
Specifications:
Model
Wavelength Range
Spectral Bandwidth
Optical System
Wavelength Accuracy
Wavelength Repeatability
Photometric Accuracy
Photometric Repeatability
Photometric Range
Stray Light
Stability
Display
Keyboard
Photometric Mode
Detector
Sample Compartment
Light Source
Output
Power Requirement
Dimensions (W x D x H)
Net Weight
Installation:
1.
After carefully unpacking the contents, check the materials with the packing list
(page 2) to ensure that you have received everything in good condition.
2.
Place the instrument in a suitable location away from direct sunlight. In order to
have the best performance from your instrument, keep it as far as possible from
any strong magnetic or electrical fields or any electrical device that may generate
high-frequency fields. Set the unit up in an area that is free of dust, corrosive
gases and strong vibrations.
3.
Remove any obstructions or materials that could hinder the flow of air under and
around the instrument.
4.
Use the appropriate power cord and plug into a grounded outlet.
5.
Turn on your DV-8000 model spectrophotometer. Allow it to warm up for at least
20 minutes before taking any readings.
Single Beam, Grating 1200lines/mm
-0.097-1.999A 0-125%T
±0.002A/h @500nm
Graphic LED (4 bits)
Standard 10mm path length cuvette
Accommodates 100mm path length cuvette with optional holder
4
DV-8000 USER'S MANUAL
DV-8000
325-1020nm
4nm
±2nm
1nm
±0.5%T
±0.3%T
≤0.2%T @ 340nm
Membrane Keypad
T, A, C, F
Silicon Photodiode
Tungsten lamp
RS232 Port
AC 85-250V
450 x340 x 180mm
8kg