Drawell YP2000 사용 설명서 - 페이지 8

{카테고리_이름} Drawell YP2000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Drawell YP2000 11 페이지. Precision balance

Turning the Power On

1 Insert the plug of the Power Cord into the DC IN connector on the back of the

balance.

2 Connect the Power Cord to the power outlet.

3 Press "ON".

The display will automatically go through the changes indicated below.

Warming Up

Before performing span calibration on the balance or measuring its accuracy,

you must ensure that is it in a stable state.

When stabilizing the balance, it is important that its temperature is stable.

Putting the balance in weighing mode and leave it with the power on for at

least half an hour in advance of calibration.

This is called "warming up".

Performing Span Calibration

Always perform span calibration for a balance after moving it. Weights are

required for external calibration balances.

Before performing span calibration, warm up the balance in advance.