Bosch WLF16180OE 운영 및 설치 매뉴얼 - 페이지 43
{카테고리_이름} Bosch WLF16180OE에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch WLF16180OE 44 페이지.
페이지 인쇄
Transport,
e.g. when moving
Preparing and inserting the
transport bolts
Before transporting the washing machine:
- Turn off the tap.
- Reduce the water pressure in the water inlet hose
(refer to page 27).
- Drain any residual washing solution (refer to
page 26).
- Disconnect the washing machine from the mains.
- Dismantle the supply and drainage hose.
- Install transportation protection devices.
Having transported the appliance and ensured
proper installation and connection, allow the Spin B"
programme to run through before starting the first
wash programme.
Transporting the washing machine:
q Remove the lower covers.
q Prepare the transport bolts:
Loosen the screw in the sleeve until the end of the
screw is level with the end of the sleeve.
q Attach and close the cover plate.
The catch on the washer must sit inside the groove
on the rear housing panel.
43