Drawmer dl441 운영자 매뉴얼 - 페이지 8

{카테고리_이름} Drawmer dl441에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drawmer dl441 12 페이지. Quad compressor limiter
Drawmer dl441에 대해서도 마찬가지입니다: 운영자 매뉴얼 (12 페이지)

페이지 인쇄

Bypass:

Gain Reduction Meter:

Output Level Meter:

Level:

Stereo Link:

This switch will disable the functioning of the Compressor

section and the Peak Limiter. If operating in Stereo Linked

mode, both linked channels will be bypassed simultaneously.

The DL441 Bypass is a 'hard bypass' which directly links the

input sockets to the output sockets whenever Bypass is active.

The adjacent red LED indicates the Bypass status.

An eight segment LED bargraph meter continuously monitors the

gain reduction applied by the compressor/limiter over the range

0 to 30dB.

This is a 5-segment LED bargraph level meter that monitors the

level of the output signal over the range -10dB to +10dB with

reference to the selected (-10dBu or +4dBu) operating level.

Peak Limiter

This control sets an absolute limit to the level that the output

signal will not be permitted to exceed. This limiter is very fast

acting enabling it to control any peaks without audible distortion.

If the output signal is so high as to cause the limiter to operate

for more than 20mS, the system gain is automatically reduced to

bring the signal back within range. The system gain is then

returned to normal over a period of approximately one second.

The compressor Gain control should be used to ensure that the

peak limiter operates only rarely if at all if the limiter is to be

used purely for peak protection. Alternatively, the unit may be

deliberately driven into limiting to produce creative effects.

Linking

These two switches configure channels 1,2 or 3,4 for stereo

operation where the left hand channel's controls act as masters

for both slave audio channels.

The same degree of gain reduction is applied to both audio

channels to prevent image shifting which would otherwise occur

whenever the left and right signal dynamics varied from each

other by any significant degree.

DL441 OPERATORS' MANUAL