Drawmer TS1 운영자 매뉴얼 - 페이지 8

{카테고리_이름} Drawmer TS1에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drawmer TS1 17 페이지. Stereo vacuum tube compressor with instrument & mic pre

COMPRESSOR SECTION

Source

Compressor

Attack

Release

Selects between the Line Input and the Front End Section.

This serves as the input gain control to the compressor which has

a preset threshold. Rotate clockwise until the required amount of

compression is achieved. The amount of compression is indicated

by a LED bar indicator on the front panel.

Attack controls the speed at which the compressor responds to a

rise in signal level. The sound of any percussive signals can be

altered by using this control because long attack times allow the

initial part of the signal to escape compression thus giving a

certain amount of 'punch' to the sound.

Release controls the speed which the compressor recovers when

the signal drops in level. The faster the release, the louder the

apparent output level, but most compressors create some

distortion when short release times are used, so care should be

taken to arrive at the correct setting.

Tube Station 1 OPERATORS' MANUAL